Bugaboo Bee Stroller User Manual

emoving the sun canopy
to remove the sun canopy:
You may find it easier to remove the seat unit
before removing and reattaching the sun canopy.
See turning the seat unit on page 29 for
instructions on how to do this.
2
4
Undo the eight buttons around the edge
of the backrest.
Unhook the three sets of elastic loops
found both sides of the Bugaboo Bee.
Pull the sun canopy, with the metal wire
frame still attached, away from the
Bugaboo Bee.
To wash the sun canopy, slide the metal
wire frame out of the sun canopy
(see cleaning on page 8).
to reattach the sun canopy:
2
4
To ensure that the bend on the wire is facing
the correct direction, each wire has a marking
on one end. Feed the wire through the sun
canopy, marking end first, starting on the
side with the Bugaboo label.
Reattach the metal wire frame to the
Bugaboo Bee chassis.
Hook the three sets of elastic loops to
both sides of the seat.
Fasten the sun canopy over the eight
buttons on the backrest.
en
es
fr
6
taking care
9