buy a Sea Ray - ARI Network Services
buy a Sea Ray - ARI Network Services
buy a Sea Ray - ARI Network Services
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Advanced Robotics. Our computerized mill, the<br />
largest in the industry, uses CAD data to<br />
create master patterns that are accurate to 1/1,000th<br />
of an inch. Laser-guided robots apply gel-coat of a<br />
strict consistency and thickness to the hull and deck.<br />
Less exacting methods can result in coatings that<br />
are too thick and will crack, or too thin and don’t<br />
provide adequate coverage. Instead of using paper<br />
patterns and electric scissors to cut fabrics, <strong>Sea</strong> <strong>Ray</strong><br />
insists on the precision of a computer to drive its<br />
fabric cutting process. Bottom line: <strong>Sea</strong> <strong>Ray</strong> gives<br />
you a more accurate, higher quality boat.<br />
Closed-Mold Technology. <strong>Sea</strong> <strong>Ray</strong> produces<br />
more than 40,000 closed-molded parts a year. We<br />
utilize this technology to ensure that the correct<br />
amount of resin is injected into your boat’s molded<br />
components. The outcome is a consistent,<br />
structurally sound piece that is smooth fiberglass<br />
on both sides for good looks and simple cleanup.<br />
Engine Compartments. We finish our engine<br />
compartments with gel-coat containing a wax additive<br />
Our computer-driven robots make cuts with accuracy to 1/1,000th of an inch.<br />
that repels water and petroleum-based products. In<br />
addition, our aluminum engine mounts are thru-<br />
bolted on top of the stringer system for long-term<br />
alignment. Each engine hatch has a rubber seal that,<br />
in combination with foam insulation, greatly reduces<br />
engine noise. It all adds up to easy upkeep and a<br />
more relaxed atmosphere for you and your guests.<br />
Fiberglassed Bulkheads. Each bulkhead is<br />
fiberglassed to both the hull and deck, creating one<br />
integral part for added strength and longevity. You’ll<br />
enjoy a more structurally-sound vessel with less<br />
rattles and less hassles than a boat where bolts or<br />
other joining methods are used.<br />
Fixed Fuel Tanks. Our fuel tanks are installed<br />
with banding straps rather than L-brackets or<br />
another non-supporting method. This means the<br />
fuel tanks are an integrated component of the hull,<br />
resulting in increased strength and less vibration and<br />
noise — which makes for a quieter, more enjoyable<br />
boating experience.<br />
4.