Cinedeck Extreme User Manual

More documents

Recommendations

Info

<strong>User</strong> Interface General notes about the user interface The user interface has been designed with use in high pressure situations in mind, where a minimum of interaction is desirable to operate the <strong>Cinedeck</strong> and in normal operation, every tool commonly needed is readily at hand. Most commonly used tools are accessible within one touch from the main screen. The touchscreen is the main control surface for the interface, but there are also physical buttons for commonly used functions while in full screen preview mode. Active (on) buttons are indicated by [text] and inactive buttons are indicated by {text} Main user interface (recording) The main user interface is the record screen, which includes displays with relevant information for the current input and output settings, project, scene and take names, timecode display, and access to all commonly used tools. Touching information displays will take the user to the relevant setup menu. ie touching the timecode display invokes the timecode setup menu. This is typical for most status and information displays. During record, there is a bright red border around the preview image. Buttons that are inaccessible such as [play] and [setup] disappear. Certain dynamic information displays that are only relevant during record appear, such as data rate and system resource usage, buffer status, and disk wait time display. This border will begin to flash bright yellow when there is approximately 10GB of space remaining on the media. When there is less than 2GB of remaining space, recording will stop automatically. long -74.0715 Frame 1080p YUV10 lat 40.416 Fps 23.98 alt 51.166 Codec CineForm 1.1MB/frame 27.3MB/s temp 72 SDI Phones long -74.0715 lat 40.416 alt 51.166 temp 78 SDI Phones 2/2 0 long -74.0715 lat 40.416 alt 51.166 temp 84 SDI Phones Frame Fps Codec Frame Fps Codec 1080i YUV10 25 Prores HQ 1.1MB/frame 27.3MB/s lock reset 1080p YUV10 23.98 DNxHD 0.8MB/frame 20.3MB/s manhattan_aerial next: reel_2_002 00:12:06:21 manhattan_aerial next: reel_2_031 00:05:15:04 manhattan_aerial next: reel_2_031 01:17:56:01 Battery 97% last take 1:40 Battery 64% last take 5:39 Battery 24% last take 15:34 Media 128GB Free 126GB Remain 92 min play lock reset setup Media 128GB Free 102GB Remain 62 min Media 128GB Free 9GB Remain 10 min play lock reset setup record slate safe grid 100% edge analysis clipping fullscreen stop record slate safe grid 100% edge analysis clipping fullscreen stop record slate safe grid 100% edge analysis clipping fullscreen stop
Main user interface, cont. record Record start [record] To prevent accidental recordings, the button must be held down for about 1/2 second before record will engage. stop Record stop [stop] To prevent accidentally stopping the recording, the button must be held down for about 1/2 second before stop will engage. record stop long -74.0715 lat 40.416 alt 51.166 temp 72 SDI Phones long -74.0715 lat 40.416 alt 51.166 temp 72 SDI Phones Frame Fps Codec play lock reset setup Frame Fps Codec Wired remote record start/stop [start][stop] When in ‘wired remote’ mode, [setup]:[prefs]:{rec/stop}the record button also acts as the stop button. Once record is engaged, the text in the record button will change to [stop] SDI Phones 1080p YUV10 23.98 CineForm 1.1MB/frame 27.3MB/s 1080p YUV10 23.98 CineForm 1.1MB/frame 27.3MB/s manhattan_aerial next: reel_2_031 00:12:06:21 manhattan_aerial next: reel_2_031 00:12:06:21 Battery 44% last take 3:22 Battery 44% last take 3:22 Media 128GB Free 73GB Remain 46 min Media 128GB Free 73GB Remain 46 min play lock reset setup long -74.0715 lat 40.416 alt 51.166 temp 72 Frame Fps Codec 1080p YUV10 23.98 CineForm 1.1MB/frame 27.3MB/s manhattan_aerial next: reel_2_031 00:12:06:21 Battery 44% last take 3:22 Media 128GB Free 73GB Remain 46 min record slate safe grid 100% edge analysis clipping fullscreen stop record slate safe grid 100% edge analysis clipping fullscreen play lock reset setup stop record slate safe grid 100% edge analysis clipping fullscreen
Page 1 and 2: Cinedeck Extreme User Manual Versio
Page 3 and 4: Contents About this manual ........
Page 5 and 6: Input pixel format ................
Page 7 and 8: Average data rates ................
Page 9 and 10: Safety information CAUTION: The Fed
Page 11 and 12: Hardware I/O 12-28V wide input DC j
Page 13: Powering up the Cinedeck Note: we r
Page 17 and 18: Main user interface, cont. Safe Fra
Page 19 and 20: Main user interface, cont. Grid Dis
Page 21 and 22: Main user interface, cont. edge Edg
Page 23 and 24: Main user interface, cont. Waveform
Page 25 and 26: Main user interface, cont. histogra
Page 27 and 28: clipping Highlight Clipping [clippi
Page 29 and 30: Main user interface, cont. Full scr
Page 31 and 32: Main user interface, cont. Playback
Page 33 and 34: Main user interface, cont. Settings
Page 35 and 36: Main user interface, cont. Last tak
Page 37 and 38: Main user interface, cont. 2/2 0 Pe
Page 39 and 40: Playback user interface, cont. Play
Page 41 and 42: Playback user interface, cont. reco
Page 43 and 44: Input preferences tab [setup]:[inpu
Page 45 and 46: Input preferences tab, cont. [setup
Page 47 and 48: Folder manager tab [setup]:[files]
Page 49 and 50: Folder manager tab, cont. [setup]:[
Page 51 and 52: Time code Preferences Tab, continue
Page 53 and 54: Time code Preferences Tab, continue
Page 55 and 56: Convert preferences tab [setup][con
Page 57 and 58: Convert preferences tab, continued
Page 59 and 60: Update preferences tab, continued [
Page 61 and 62: General preferences tab, continued
Page 63 and 64: Cinedeck Operating System Field Res
Page 65 and 66:
Breakout cable connections RS 422 D
Page 67 and 68:
Setting up the docking station for
Page 69 and 70:
Setting up new SSD media for use wi
Page 71 and 72:
Using the Patriot trim utility for
Page 73 and 74:
OCZ Vertex2 Secure Erase process fo
Page 75 and 76:
Setting the battery meter COM port,
Page 77 and 78:
Average data rates Prores
Page 79:
Average Data Rates CineForm Cinefor
show all

Cinedeck Extreme User Manual

Create successful ePaper yourself

Delete template?

Save as template?