DISASSEMBLY 1. REMOVE NO. 2 BREATHER PLUG a. Using a ...

More documents

Recommendations

Info

http://www.ondemand5.com/mric/common/asp/printart.aspx Fig. 379: Identifying Snap Rings Courtesy of TOYOTA MOTOR SALES, U.S.A., INC. b. Remove the flange, 4 clutch discs, and 4 clutch plates from the direct multiple disc clutch assembly. 21. INSPECT NO. 1 CLUTCH DISC (See INSPECTION ) Fig. 380: Identifying Clutch Flange, Discs And Plates Courtesy of TOYOTA MOTOR SALES, U.S.A., INC. 7/30/2012 22. REMOVE TRANSAXLE HOUSING a. Remove the 20 bolts from the transaxle housing. b. Using a brass bar and hammer, tap on the circumference of the transaxle housing to remove the transaxle housing from the transaxle case. AUTOMATIC TRANSMISSION - U660E (EXCEPT HYBRID) -2008 Toyota Camry SE Page 28 of 77
http://www.ondemand5.com/mric/common/asp/printart.aspx Fig. 381: Identifying Transaxle Housing Bolts Courtesy of TOYOTA MOTOR SALES, U.S.A., INC. 23. REMOVE COUNTER DRIVEN GEAR FRONT TAPERED ROLLER BEARING OUTER RACE a. Using SST, remove the counter driven gear front tapered roller bearing outer race and shim from the transaxle housing. SST 09308-00010 AUTOMATIC TRANSMISSION - U660E (EXCEPT HYBRID) -2008 Toyota Camry SE 7/30/2012 Page 29 of 77
Page 1 and 2: http://www.ondemand5.com/mric/commo
Page 27: http://www.ondemand5.com/mric/commo
Page 77: http://www.ondemand5.com/mric/commo

DISASSEMBLY 1. REMOVE NO. 2 BREATHER PLUG a. Using a ...

Create successful ePaper yourself

Delete template?

Save as template?