DISASSEMBLY 1. REMOVE NO. 2 BREATHER PLUG a. Using a ...
DISASSEMBLY 1. REMOVE NO. 2 BREATHER PLUG a. Using a ...
DISASSEMBLY 1. REMOVE NO. 2 BREATHER PLUG a. Using a ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
http://www.ondemand5.com/mric/common/asp/printart.aspx<br />
Fig. 350: Locating Park/Neutral Position Switch Assembly Bolts<br />
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.<br />
3. <strong>REMOVE</strong> OIL COOLER TUBE UNION (INLET OIL COOLER UNION)<br />
a. Loosen the nut while holding the oil cooler tube union (inlet oil cooler union).<br />
b. Remove the oil cooler tube union (inlet oil cooler union) from the transaxle case.<br />
c. Remove the O-ring from the oil cooler tube union (inlet oil cooler union).<br />
AUTOMATIC TRANSMISSION - U660E (EXCEPT HYBRID) -2008 Toyota Camry SE<br />
7/30/2012<br />
Page 4 of 77