Owner's Manual - Garrett

More documents

Recommendations

Info

8 5. Depress the spring clip in the lower stem to adjust to the most comfortable operating length. 6. Wrap the searchcoil snugly about the stem with the first turn of the cable over the stem. <strong>Garrett</strong> Metal Detectors
. Insert the cable connector into the connector of control housing and hand-tighten. 8. The location of the arm cuff may be adjusted by removing the screw on the bottom and moving it to the other hole. 9 Ace 150 • Ace 250
Page 1 and 2: Owner’s Manual
Page 3 and 4: Thank You For Choosing Garrett Meta
Page 5 and 6: TABLE OF CONTENTS ACE Parts .......
Page 7 and 8: ACE Parts No tools are required to
Page 9: . Insert the threaded bolt through
Page 13 and 14: 1. Mode—Indicates which of the th
Page 15 and 16: have a shorter life per charge. You
Page 17 and 18: ACE 150 Controls 1. POWER Pushbutto
Page 19 and 20: • Jewelry Mode—This mode is des
Page 21 and 22: 2. Upper Scale—The Upper Scale, w
Page 23 and 24: LCD cursor located on the Lower Sca
Page 25 and 26: peak signal area. With practice at
Page 27 and 28: ELIM can also be used to modify the
Page 29 and 30: • Walk slowly as you scan your se
Page 31 and 32: Troubleshooting Guide SYMPTOM SOLUT
Page 33 and 34: • I will not leave litter or othe
Page 35 and 36: • Do not disturb any pipeline, pa
Page 37 and 38: 4. Perform this test in all the mod
Page 39 and 40: • Protect your control housing fr
Page 41 and 42: . Included a letter that fully desc
Page 43 and 44: ACE Accessories Garrett offers a co
Page 45 and 46: 4. 4.5” ACE Super Sniper Searchc
Page 47 and 48: RAM BOOKS ORDER FORM Please send me
Page 49: 1881 W. State Street Garland, Texas

Owner's Manual - Garrett

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?