Industrial - X Horizontal - Catalog 08 - 11681810.pdf
Industrial - X Horizontal - Catalog 08 - 11681810.pdf
Industrial - X Horizontal - Catalog 08 - 11681810.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5 Cooling<br />
0 +50 +100<br />
-50<br />
°C<br />
Lubrication, Cooling and Heating<br />
5.5.2 Built-in cooling water cooling cover<br />
The water cooling cover is located on the gear unit’s assembly opening and is provided<br />
with cooling water through a water connection that is provided by the operator. It is available<br />
for sizes 180 to 210.<br />
The amount of heat that can be removed depends on the intake temperature and the<br />
volume flow of the cooling medium that flows through the unit. The permitted thermal<br />
rating is listed in the selection tables in chapter 10.2.<br />
STOP<br />
Contact SEW-EURODRIVE if chemically aggressive cooling media, such as brackish<br />
or salt water, are used.<br />
NOTE<br />
For the connection dimensions, refer to chapter 10.3.<br />
Structure The water cooling cover [1] is made of a corrosion-resistant aluminum alloy.<br />
Two bores G1/2' with pipe threads are available to connect to the cooling circuit. The<br />
piping is not included in the scope of delivery.<br />
Gear units in the water cooling cover version are delivered completely assembled.<br />
A water cooling cover may be retrofitted; consult SEW-EURODRIVE.<br />
[1]<br />
[2]<br />
[3]<br />
[2] [1] [3]<br />
Water cooling cover<br />
Inflow<br />
Return<br />
68 <strong>Catalog</strong> – Helical and Bevel-Helical Gear Units X.. Series <strong>Horizontal</strong><br />
[1]<br />
60982AXX
Change language