Technical Data - Kaigan

62
Nitrox / Trimix
Nitrox / Trimix
Nitrox Membrane Systems
The Nitrox membrane must be supplied with a clean low pressure air supply, this can either come from a high pressure breathing
air storage (in combination with a Mixmaster HP) or from a low pressure air compressor with excellent purification before the
membrane (in combination with a Mixmaster LP).
The Mixmaster systems differ slightly in their scope of delivery.
Mixmaster HP
Available in 2 versions, large and small. The Mixmaster HP panels have an HP breathing air inlet with isolation valve and pressure
reducer that safely reduces the HP supply down to the desired LP inlet pressure. The HP version has a large filter for air conditioning
to ensure that the membrane is supplied with oil-free air, this reduces the risk of membrane contamination.
The HP solution has the advantage of using pure breathing air to feed the membrane, this reduces the risk of membrane contamination.
The investment cost are lower than a LP solution, but the running costs are higher. 2 HP compressors offer the ideal
solution with redundancy for professional diving centres. If only 1 HP compressor is available then a higher capacity storage will
be necessary.
High pressure storage Pressure reducer, membrane,
Technical Data
Mixmaster HP Technical Data
Inlet Pressure [bar]
Membrane inlet pressure LP [bar]:
Outlet to compressor (air/nitrox):
Air inlet (for air filling operations):
Dimensions W x H x D [cm]:
Weight [kg]:
analyser & reservoir
50 > 350 bar (G¼” female)
4 > 11 (11.5 bar safety valve)
G1” female
G1” female
65 x 115 x 30
75
HP compressor (gas tight inlet)
and filling hoses