Technical Parameters of RY-IIB+ Anesthesia ... - medicomercio

Control Parameters:
Exhaust valve: 0.5kPa-7.5kPa.
Leakage: not greater than 150mL/min (3kPa).
Inspiratory and expiratory impedance: not greater than 0.6kPa (60mL/min).
Size of inspiratory and expiratory valve connectors: outside diameter of 22mm and 1:40 degree
of taper.
High-precision Anesthetic Agent Vaporizer
The high-precision anesthetic agent vaporizer is capable of automatically compensating the flow,
temperature and pressure. The vaporizing concentration of anesthetic agent can be set up precisely.
The system is equipped with one vaporizer for standard configuration, or two according to
customer's demands. The interlock device is employed to ensure that the two vaporizers will not be
opened simultaneously. Customers are allowed to configure ENF vaporizer, ISO vaporizer and SEV
vaporizer, and also import vaporizers.
Concentration range: 0vol%-5vol%, flow range: 0.25L/min-15L/min, temperature range: 15℃-35℃.
Anesthesia Ventilator
The new anesthesia ventilator, with a 5.1’’ high-definition LCD, is computer-controlled and easily
configured through a coder. It displays multiple respiration parameters and waveforms. Its friendly
interface and Chinese menus enable anesthesia doctors to operate more conveniently and safely.
Ventilation mode: IPPV and MANU. Applicable to adult and pediatric patients.
Operating mode: pneumatically and electrically controlled.
Control parameters:
Tidal volume: at least 50ml-1,500ml; inspiratory flow: 3L/min-70L/min.
Frequency: 3-99 times/min; airway pressure high alarm limit: 1kPa-9.9kPa.
Expiration-inspiration ratio: 3:1-1:9; airway pressure low alarm limit: at least 0.4kPa-4kPa,
with delay time of 10s-15s.
Alarm silence: no greater than 120s; safety exhaust valve: ≤12.5kPa.
Monitoring Parameters:
Expiratory tidal volume (TVe), minute ventilation (MV), frequency, peak pressure, mean pressure,
minimum pressure, O2 concentration(optional), expiratory flow waveform, airway pressure
waveform and multi-parameter 24-hour graphic trends.
Alarm Parameters:
Airway pressure high/low limits alarm, minute ventilation (MV) alarm, O2 concentration high/low
limits alarm, sustained high airway pressure alarm, apnea alarm, ventilation system integrity alarm,
power failure alarm, gas supply failure alarm, etc.