Epoq Fitting Guide - Oticon

Automatic Adaptation Manager
The three – step Adaptation Manager helps clients gradually
adjust to the full response of hearing instruments.
Specifying the transition time between steps allows for an
automatic and smooth acclimatisation period.
1 Check to activate the automatic adaptation manager.
2 Set the initial and fi nal step for the adaptation process.
3 Specify the adaptation time.
14 15
Automatics
In the Automatics section you can enable or disable the
Automatics in the Epoq instruments.
Multi-band Adaptive Directionality is designed to provide
benefi t from Directionality in situations where the Speech-to-
Noise ratio can be improved. Through Binaural Broadband the
Multiband Adaptive Directionality in Epoq XW and Epoq W is
synchronized between right and left hearing instruments to
ensure that the loudness perception is balanced between the
two instruments.
TriState Noise Management uses VoiceFinder to detect if
speech is present or not. Noise Reduction will be applied to
provide comfort in noisy situations without compromising
important speech cues. Binaural Broadband will ensure that
the information in Epoq XW and Epoq W is synchronized
between left and right hearing instruments to make sure that
speech is detected when present, even in poor speech-tonoise
ratios.
My Voice is able to recognize the client’s own voice. This
information is used by the TriState Noise Management
system to ensure that the client’s own voice does not aff ect
the amount of Noise Reduction. My Voice is only available in
Epoq XW.