Epoq Fitting Guide - Oticon

Fitting Assistant
The Fitting Assistant is a tool designed to deal with common
problems that require adjusting the hearing instrument at the
fi tting or follow-up visit.
To operate the Fitting Assistant, select the tab that expresses
the client’s complaint and then a control (such as Loudness).
Click the control to adjust it.
The adjustments made in the Fitting Assistant are immediately
visible in the graphs. When you open the tool in the future,
you can see how far from the starting point (the middle) the
controls have been moved.
The Fitting Assistant can be used individually for each
program in the instrument.
Real Ear Measurements
The Genie REM tool lets you run the software for your Real Ear
Measurement equipment with Genie.
Use the tool to activate or deactivate advanced features to
match the purpose of the measurement.
In order to compare your measurement to target and
simulated curves in Genie, make sure that the Genie curves
are based on the same signal type and level as measured.
Note: For custom instruments you cannot verify the
Directionality when the programming cable is in the
instrument. Also, the response in REM can be aff ected by
interference of the programming cable.
22 23