FONIX® FA-10 Hearing Evaluator™ - Frye Electronics
FONIX® FA-10 Hearing Evaluator™ - Frye Electronics
FONIX® FA-10 Hearing Evaluator™ - Frye Electronics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Option A: ABLB—Alternate Binaural Loudness Balance<br />
This is a test for binaural recruitment. Recruitment is an abnormally large increase in hearing<br />
sensation for a given increase in sound level. Derecruitment is an abnormally small increase<br />
in hearing sensation for a given increase in sound level.<br />
This test will automatically alternate a tone of a selectable frequency between the left ear and<br />
right ear. The tone is presented for:<br />
appoximately 370 milliseconds in the left ear,<br />
approximately 130 milliseconds of silence,<br />
approximately 370 milliseconds in the right ear,<br />
approximately 130 milliseconds of silence<br />
(the pattern repeats).<br />
ABLB Setup:<br />
right <strong>Hearing</strong> Aid Simulator: Option A<br />
left <strong>Hearing</strong> Aid Simulator: Off<br />
right Output: Phone<br />
left Output: Phone<br />
left Input: Stenger<br />
right Input: Tone<br />
Pulse: On<br />
left simulus Reverse: On<br />
right Stimulus: Off (does not matter)<br />
frequency: (select desired frequency)<br />
left <strong>Hearing</strong> Level: (select desired amplitude)<br />
right <strong>Hearing</strong> Level: (select desired amplitude)<br />
Perform the desired ABLB hearing test.<br />
Notes:<br />
Many other Option A, ABLB setups are possible. You may select different inputs and outputs.<br />
Option A, ABLB works by disabling the Stimulus for one channel for 370 milliseconds, plus<br />
130 milliseconds of silence (both channels), then disabling the other channel for 370 milliseconds<br />
plus 130 milliseconds of silence (both channels).<br />
Option A, ABLB is active when all four of these conditions are met:<br />
• Left <strong>Hearing</strong> Aid Simulator switch set to Off<br />
• Right <strong>Hearing</strong> Aid Simulator switch set to Option A ˛<br />
• Pulse is ON<br />
• Stimulus is enabled for both channels or stimulus is enabled for one channel if Stenger<br />
is selected.<br />
If Pulse is turned off, the <strong>FA</strong>-<strong>10</strong> will operate as if the right <strong>Hearing</strong> Aid Simulator switch is<br />
set to Off.<br />
24 Chapter 4: Operation