THE NUMBER ONE CHOICE FOR THE PROFFESSIONAL

SAWS
THE NUMBER
ONE CHOICE
FOR THE
PROFFESSIONAL
The Metabo circular saw range is built for outright precision
and quality. Built tough for the demands of the professional,
machines with long life motors, safety clutches, large rip fences,
solid all metal gear housings, riving knifes and quick cut blades
fitted as standard are available within the range. Metabo. Work.
Don’t play.
188 |

SAWS
| 189

CIRCULAR SAWS
EQUIPMENT FEATURES
Ideal handling by ergonomic design
especially high sawing capacity per battery pack
Carbide circular saw blade
Easy saw blade replacement with spindle lock
Fully closed guide plate for secure support
Precisely adjustable and well visible cutting indicator
for sawing after initial cut
Suitable for bevel cuts up to 47°
Safety lock switch to prevent unintentional start of the machine
Built-in collector fan to prevent overheating
Sturdy aluminum die cast saw housing
Rubber-coated handle
External dust extraction outlet
... 40% more
output with
40% less weight
190 |
KSAP 18
Comparative
device characteristics
Type of battery pack Li-Ion
Battery pack voltage 18 V 1)
Capacity of battery pack 2,2 Ah
Cutting depth adjustable 0 - 53,5 mm
Maximum cutting depth at 90° 53,5 mm
Maximum cutting depth at 45° 42 mm
Saw blade diameter 165 mm
No load speed 2.500 /min
Weight (including battery pack) 4,3 kg
Standard equipment Carbide circular saw blade
(18 teeth), 2 Li-Ion battery packs
(18 V/2.2 Ah), hexagon spanner,
"AIR COOLED" quick charger
AC 30 Plus
1) at nominal voltage,
maximum voltage of 20 Volts
18 Volt
Cordless Circular Saw
KSAP 18
Type KSAP 18
Order no. 6.02168
COMMON FEATURES
Metabo S-automatic torque limiting clutch
Spindle lock
Fully closed guide plate for secure support
Clearly visible cutting indicator for sawing after initial cut
Safety lock switch to prevent unintentional start of the machine
Angle adjustment of the sawing blade to the guide plate can be
aligned for maximum cutting precision
Angle-precise bevel cuts up to 45°
Lubrication system for long service life of the gear
Optimum sawing dust ejection
External dust extraction outlet
Precision guide rail available as accessory (order no. 6.31250)
KS 54
Special advantages
Sturdy aluminum die cast
saw housing
Cutting indicator can
be set precisely
Extraction nozzle rotatable
and stoppable
1010 Watt
Circular Saw
KS 54
KS 66
Auto-stop carbon brushes
Comparative
device characteristics
Torque 4 Nm 9 Nm
Maximum cutting depth
at 90°
54 mm 66 mm
Maximum cutting depth
at 45°
38 mm 47 mm
Cutting depth adjustable 0 - 54 mm 0 - 66 mm
Saw blade diameter 160 mm 190 mm
No load speed 6.000 /min 4.200 /min
Rated input power 1.010 W 1.400 W
Output power 630 W 800 W
Rated load speed 4.200 /min 3.200 /min
Cutting speed at rated load 35 m/s 28 m/s
Weight (without mains cable) 3,4 kg 5,5 kg
Standard equipment Carbide thin
circular saw blade
(10 teeth), parallel
guide/ripping
fence, allen key
1400 Watt
Circular Saw
KS 66
Carbide thin
circular saw blade
(14 teeth), parallel
guide/ripping
fence, allen key
Type KS 54 KS 66
Order no. 6.00540 6.00542

COMMON FEATURES
Metabo S-automatic torque limiting clutch
Spindle lock
Sturdy aluminum die cast saw housing
Sturdy guide plate made from light-weight magnesium die cast
Fully closed guide plate for secure support
Stylish rubber insert on the top handle to aid a comfortable
and secure grip
Long double-guided parallel rip fence, can be used left or right
Clearly visible cutting indicator for sawing after initial cut
Safety lock switch to prevent unintentional start of the machine
Angle adjustment of the sawing blade to the guide plate can be
aligned for maximum cutting precision
Angle-precise bevel cuts up to 45°
Special advantages
Quick stop of saw blade on shutting
off the machine
Vario Tacho Constamatic (VTC) full-wave
electronics
KS 66 Plus KSE 68 Plus
NEW NEW
1400 Watt
Circular Saw
KS 66 Plus
Thumbwheel for preselection of speed
Electronic soft start
Overload protection
Two position riving knife lift point
CIRCULAR SAWS
Comparative device characteristics
Torque 9 Nm 11 Nm
Maximum cutting depth at 90° 66 mm 68 mm
Maximum cutting depth at 45° 47 mm 48 mm
Cutting depth adjustable 0 - 66 mm 0 - 68 mm
Saw blade diameter 190 mm 190 mm
No load speed 4.200 /min 2.000 - 4.200 /min
Rated input power 1.400 W 1.600 W
Output power 800 W 850 W
Rated load speed 3.200 /min 4.200 /min
Cutting speed at rated load 28 m/s 42 m/s
Weight (without mains cable) 5,5 kg 5,6 kg
Standard equipment Carbide thin circular saw blade (14 teeth),
parallel guide/ripping fence, allen key
Lubrication system for long service life of the gear
Optimum sawing dust ejection
External dust extraction outlet
Extraction nozzle rotatable and stoppable
Auto-stop carbon brushes
Precision guide rail available as accessory (order no. 6.31213)
Adjustment of machine without tools for using on the precision
guide rail 6.31213
1600 Watt
Electronic Circular Saw
KSE 68 Plus
Carbide thin circular saw blade (14 teeth),
parallel guide/ripping fence, allen key
Type KS 66 Plus KSE 68 Plus
Order no. 6.00544 6.00545
| 191
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATION
GARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS

ACCESSORIES FOR CIRCULAR SAWS
Accessories
NEW
NEW
NEW
NEW
192 |
NEW
Precision guide rail
Clean-cut edges with no
splintering thanks to the guide
rail's plastic-extrusion strip edging
– even with bevel cuts up to 45°
Guide rail made of sturdy,
anodised Aluminium extrusion
Anti-slip backing provides safe
and reliable support and protects
the workpiece surface against
scratches
Guide rule, adjustable to
eliminate play
suitable for: Metabo jig saws,
circular saws and router models
OFE 738 and Of E 1229 Signal
(when using the appropriate
accessories; KS 66 Plus,
KSE 68 Plus can be used)
Overall length: 1.500 mm
Connector
For joining together
two precision guide rails
Set of two clamps
For fixing the precision guide rail
on the workpiece or work table
Guide plate
For use with the KSAP 18,
KS 54 and KS 54 SP circular saws
on the 6.31213 guide rail.
Complete guide plate with
2 mounted aluminium
threaded bushes for the
circular saws
Adapters
For use with the KS 66 and
KSE 68 Plus circular saws
(alt. Order No. 6.00543)
on the 6.31213 guide rail.
Sawdust ejection nozzle
Can be rotated
For fitting the suction
hose on the circular saw
KS 54 and KSE 55 Plus
Suction hose
With connector Ø 58 mm
for bayonet fitting and rubber
connector (internal Ø 30 mm,
outside Ø 35 mm)
Connector Ø: 58/35 mm
Hose length: 3,5 m
Suction hose Ø: 27 mm
Order no.
6.31213
6.31211
6.31031
6.31019
6.31020
6.30924
6.31938
Metabox IV
Extremely robust, unbreakable
boxes with a wide carrying handle
Carefully thought-out organisation
system within the box... ensures
that the correct accessory is always
with the right tool - special inserts
for storing accessories and small
parts... and transferring them from
box to box - boxes can be stacked
and connected - well-structured,
clearly arranged storage system,
for the workshop, the car, anywhere
The Metabox stays in shape -
even at extreme temperatures
(-40° to +90°C)
No protruding parts, and thus no
danger of getting caught up, e.g.
on building sites
Dimensions: 395 x 295 x 315 mm
For KS 54, KSE 55 Plus, KS 66 6.24595
For KS 66 Plus, KSE 68 Plus
6.24598
Work benches
Flexo 500 universal table
For the stationary use of
Metabo jig saws, routers and
circular saws (when using
appropriate accessories)
With foldable stand and
height adjustment
Sturdy steel construction and a large
table top made from continuous
strand casting
Special accessories for Flexo 500
NEW
Circular saw set
For Metabo KS 54,
KSE 55 Plus, KS 66,
KSE 68 Plus circular saws
Packaging dimensions (LxHxW):
750 x 280 x 130 mm
Table width extension
Increases the supporting
surface; ideal for
large boards
Enables cuts with
parallel guide of
up to 610 mm
Height adjustable
Length: 674 mm
Width: 501 mm
Parallel guide/ripping fence
For long cuts or for cutting
large boards
Long attachment profile
for guiding the work
piece safely
Mitre guide
Length of rule: 250 mm
Angle area: +/- 60°
Chip and dust extraction unit
Extraction at two points:
at chip box and at the
top on the guard
Clear view of the
work piece
Cleaner working
environment
Extraction nozzle Ø: 100 mm
NEW
Order no.
0910064304
GB
Order no.
0910064398
GB
0910064401
GB
0910063707
GB
0910064410
GB
0910064371
GB

FOR CIRCULAR SAWS
Carbide-tipped circular saw blades
"power cut"
Diameter
mm
NEW
Cutting
width
mm
• For fast, coarse and semi-fine cuts with continuous feed rates
• Good cutting results for straight cuts in solid wood
• Partly usable for construction wood with nails and concrete residue
• With coated wood or other composites only coarse cut quality is possible
Steel blade
thickness
mm
Bore-Ø
mm
Number
of teeth
Tooth form Rake
angle
CIRCULAR SAW BLADES
suitable for Order no.
152 2,4 1,6 20 12 Flat top tooth 15° Ks 0852 S 6.28001
160 2,2 1,4 20 10 Alternately bevel-ground tips 22° KS 54 / KSE 55 Plus 6.28002
167 2,4 1,6 20 12 Flat top tooth 15° Ks 1155 S 6.28003
190 2,6 1,8 20 14 Alternately bevel-ground tips 25° Ks 1266 S / Ks 1468 S 6.28004
190 2,2 1,4 30 14 Alternately bevel-ground tips 25° KS 66 / KSE 68 Plus 6.28005
190 2,2 1,4 30 16 Flat/trapezoid tooth 12° KS 66 / KSE 68 Plus 6.280061) 210 2,6 1,8 30 16 Flat top tooth 25° Ks E 1678 S-Signal 6.28007
230 2,6 1,8 30 18 Flat/trapezoid tooth 10° KS 85 6.280101) 230 2,6 1,8 30 24 Alternately bevel-ground tips 20° KS 85 6.28011 1)
1) exceptionally nail-proof saw blade
Carbide-tipped circular saw blades
"precision cut"
Diameter
mm
NEW
Cutting
width
mm
Steel blade
thickness
mm
Bore-Ø
mm
Number
of teeth
Tooth form Rake
angle
suitable for Order no.
160 1,6 1,1 20 24 Alternately bevel-ground tips 22° KSAP 18 6.28030
160 2,2 1,4 20 24 Alternately bevel-ground tips 20° KS 54 6.28031
167 2,4 1,6 20 20 Alternately bevel-ground tips 20° Ks 1155 S 6.28032
167 2,4 1,6 20 40 Alternately bevel-ground tips 10° Ks 1155 S 6.28033
190 2,6 1,8 20 48 Alternately bevel-ground tips 10° Ks 1266 S/ Ks 1468 S 6.28034
190 2,2 1,4 30 48 Alternately bevel-ground tips 15° KS 66 / KSE 68 Plus 6.28035
210 2,6 1,8 30 56 Alternately bevel-ground tips 10° Ks E 1678 S-Signal 6.28040
230 2,6 1,8 30 56 Alternately bevel-ground tips 15° KS 85 6.28044
Carbide-tipped circular saw blades
"multi cut"
Diameter
mm
NEW
Cutting
width
mm
• Very wide range of uses in woodworking
• For very good, clean cut results with straight or cross cutting in softwood and hardwood
• Well suited for solid and plywoods, chipboards untreated, coated or veneered, MDF, composite materials
• The circular saw must have a high performance motor
• Universal use for demanding materials
• For the highest standards in cutting quality, e.g. laminate, plastic, aluminium, copper and bronze materials
• Ideally suited for many applications in interior work
• Perfect cutting results, also when crosscutting, in solid wood, coarse, coated or veneered chipboards, MDF
• The circular saw must have a very high performance motor
• Requires steady and relatively slow feed rates
Steel blade
thickness
mm
Bore-Ø
mm
Number
of teeth
Tooth form Rake
angle
suitable for Order no.
150 2,4 1,6 20 36 Alternately bevel-ground tips 10° Ks 0852 S 6.28000
152 2,4 1,6 20 54 Flat/trapezoid tooth 5° neg. Ks 0852 S 6.28070
160 2,2 1,4 20 30 Alternately bevel-ground tips 5°+/-1.5 KS 54 / KSE 55 Plus 6.28071
160 2,2 1,4 20 42 Alternately bevel-ground tips 15° KS 54 / KSE 55 Plus 6.28072
160 2,2 1,4 20 54 Flat/trapezoid tooth 8° KS 54 / KSE 55 Plus 6.28073
167 2,4 1,6 20 42 Flat/trapezoid tooth 6° neg. Ks 1155 S 6.28074
190 2,2 1,4 30 36 Alternately bevel-ground tips 5°+/-1.5 KS 66 / KSE 68 Plus 6.28075
190 2,6 1,8 20 54 Flat/trapezoid tooth 5° neg. Ks 1266 S / Ks 1468 S 6.28076
190 2,2 1,4 30 56 Flat/trapezoid tooth 8° KS 66 / KSE 68 Plus 6.28077
210 2,6 1,8 30 54 Flat/trapezoid tooth 5° neg. Ks E 1678 S-Signal 6.28078
210 2,8 2,0 30 60 Alternately bevel-ground tips 5° neg. Ks E 1678 S-Signal 6.28079
210 2,8 2,0 30 60 Flat/trapezoid tooth 5° neg. Ks E 1678 S-Signal 6.28080
230 2,6 1,8 30 60 Alternately bevel-ground tips 5° KS 85 6.28085
230 2,6 1,8 30 60 Flat/trapezoid tooth 8° KS 85 6.28086
| 193
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATION
GARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS

JIG SAWS
OTHERS SOMETIMES JUST DON‘T CUT IT.
Metabo offer a solid range of Jigsaws from entry level
through to top end professional machines. Backed up
with an extensive range of accessories these machines
are capable of cutting a whole host of materials from
wood, metals, plastics, brick and breeze block to fiber
194 |
Vario Constamatic (VC) electronics
allow you to set the right speed for
the application and then maintain that
speed, even under moderate loading.
Ergonomic design
Safe and comfortable
work due to a model
that fits perfectly in the
hand.
Powerful for continuous professional use
The 720-Watt electronic orbital jigsaws
enable saw cuts of up to 135 mm thickness
in wood.
Quick stop
of guide plate
It enables bevel
cuts with angle
settings of 15, 30
and 45°.
Absolutely straight or circular cuts
Additional accessories such as guide rails
or circular guides expand the range of
applications of the Metabo jigsaws.
glass and rubber. Important features include high
powered motors, tough gear housings, solid blade supports
and variable speed electronics to enable the right
speed selection for the job in hand.
Die cast aluminium
gear housing
Metal gear housings
ensure optimum integral
machine strength
and maximum heat
dissipation which aids
motor cooling and
prolongs service life.
5-level pendulum
blade movement
High cutting output,
more comfortable working,
longer service life
of saw blades.
Vario Constamatic (VC) full-wave electronics
The number of strokes can be adapted
individually to the material to be cut. For
metal, for example, it is low, for wood it is
high.
Metabo „Quick“
saw blade
change
Fast, convenient
and safe. Saw
blade change
without key.
Saw blade support
roller with needle
bearing and guide groove
Precise saw cuts, as
the support roller is
particularly deep.

COMMON FEATURES
Robust gear and motor design
Easier and quicker saw blade change
Low lying saw blade supporting roller
Quick locking of guide plate for bevel cuts
Ideal handling by ergonomic design
Full grip bow type handle
Blower for free view of cutting line
Upward slidable grip-guard
Special advantages
Metabo "Quick" saw
blade change
Vario Constamatic (VC)
full-wave electronics
Thumbwheel for preselection
of number of strokes
ST 50 Pendix
STE 70
400 Watt
Orbital Jig Saw
ST 50 Pendix
STE 80 Quick
Comparative device characteristics
Torque 4 Nm 5 Nm 5,5 Nm
Maximum thickness of material in
- Wood 50 mm 70 mm 80 mm
- Nonferrous metals 10 mm 20 mm 25 mm
- Sheet steel 3 mm 6 mm 8 mm
Levels of pendulum stroke 4 4 4
Strokes at no load 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min
Rated input power 400 W 570 W 610 W
Output power 240 W 340 W 360 W
Weight (without mains cable) 2,2 kg 2,2 kg 2,3 kg
Standard equipment Grip-guard, chip break guard
plate, jig saw blade, allen key
Adjustable pendulum stroke
External dust extraction outlet
Auto-stop carbon brushes
Chip break guard in the guide plate
Precision guide rail and guiding device available
as accessory
Case for allen key
570 Watt
Electronic
Orbital Jig Saw
STE 70
Protective glass, grip-guard,
chip break guard plate,
jig saw blade, allen key
Protective glass, grip-guard,
attachable guard plate with chip
break guard plate, jig saw blade,
allen key
Type ST 50 Pendix STE 70 STE 80 Quick
Order no. 6.04000 6.05700 6.06100
JIG SAWS
610 Watt
Electronic
Orbital Jig Saw
STE 80 Quick
| 195
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATION
GARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS

JIG SAWS
COMMON FEATURES
Robust gear and motor design
Low lying saw blade supporting roller
Quick locking of guide plate for bevel cuts
Ideal handling by ergonomic design
Blower for free view of cutting line
Upward slidable grip-guard
Vario Constamatic (VC) full-wave electronics
Thumbwheel for preselection of number of strokes
STE 100 Plus STE 135 STE 135 Plus STEB 135 STEB 135 Plus
Special advantages
Powerful cutting in wood
up to 135 mm thickness
Easier and quicker saw blade
change
Metabo "Quick" saw blade
change
Rubber-coated full grip
bow-type handle
Slim motor housing and
additional knob
196 |
680 Watt
Electronic
Orbital Jig Saw
STE 100 Plus
Comparative
device characteristics
Torque 6 Nm 7 Nm 7 Nm 7 Nm 7 Nm
Maximum thickness
of material in
- Wood 110 mm 135 mm 135 mm 135 mm 135 mm
- Nonferrous metals 25 mm 35 mm 35 mm 35 mm 35 mm
- Sheet steel 8 mm 10 mm 10 mm 10 mm 10 mm
Levels of pendulum stroke 5 5 5 5 5
Strokes at no load 1.000 - 2.800 /min 1.000 - 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min
Rated input power 680 W 720 W 720 W 720 W 720 W
Output power 400 W 450 W 450 W 450 W 450 W
Weight (without mains cable) 2,6 kg 2,5 kg 2,5 kg 2,6 kg 2,6 kg
Standard equipment Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
720 Watt
Electronic
Orbital Jig Saw
STE 135
Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
Adjustable pendulum stroke
Die cast aluminium gear housing
External dust extraction outlet
Auto-stop carbon brushes
Chip break guard in the guide plate
Precision guide rail and guiding device available
as accessory
Case for allen key
720 Watt
Electronic
Orbital Jig Saw
STE 135 Plus
Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
720 Watt
Electronic
Orbital Jig Saw
STEB 135
Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
720 Watt
Electronic
Orbital Jig Saw
STEB 135 Plus
Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
Type STE 100 Plus STE 135 STE 135 Plus STEB 135 STEB 135 Plus
Order no. 6.10501 6.11100 6.10900 6.11200 6.11000

Jigsaw blade assortments with single lug bayonet shank
Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch,
DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil ...
Accessories
NEW
Jigsaw blade assortment 1
For wood and metal
HCS saw blades/
HSS saw blade
Consisting of 1 saw blade each:
6.23634, 6.23633, 6.23637
Material suitability:
Wood, Metal
Number of parts: 3
Jigsaw blade assortment 2
For wood, metal and plastic
HCS saw blades/
HSS saw blade
Consisting of 1 saw blade each:
6.23633, 6.23635, 6.23632, 6.23631
und 6.23637
Material suitability:
Wood, Plastics, Metal
Number of parts: 5
Jigsaw blade assortment 3
For wood, metal and plastic
HCS saw blades/
HSS saw blades
Consisting of 2 jigsaw blades each:
6.23634, 6.23633, 6.23646,
6.23637, 6.23638
Material suitability:
Wood, Metal, Plastics
Number of parts: 10
Jigsaw blade assortment 4
For wood
HCS saw blades
Consisting of 10 saw blades
6.23633 and 6.23635 and
5 saw blades 6.23649
Material suitability: Wood
Number of parts: 25
Guard plate
For fitting on the base
plate of jigsaws. The guard
plate protects sensitive
workpiece surfaces
from scratches
Circle-cutting and
parallel guide
For cutting circles of Ø 100
to Ø 360 mm and
for cutting parallel
to an edge (maximum distance
from the edge 210 mm)
Guiding device
For using jigsaws
in conjunction
with the guide
rail 6.31250/ 6.31213
Precision guide rail
Clean-cut edges with no
splintering thanks to the
guide rail's plastic-extrusion
strip edging – even with bevel
cuts up to 45°
Guide rail made of sturdy,
anodised Aluminium extrusion
Anti-slip backing provides
safe and reliable support
and protects the workpiece
surface against scratches
Guide rule, adjustable
to eliminate play
Overall length: 1.500 mm
Order no.
6.23968
6.23645
6.23600
6.23698
Order no.
6.23664
6.31340
6.31249
6.31213
NEW
NEW
NEW
ACCESSORIES FOR JIG SAWS
NEW
Connector
For joining together
two precision guide rails
Set of two clamps
For fixing the precision
guide rail on the
workpiece
or work table
Jigsaw bench mounting plate
With clamp for fixing on the
workbench
Table-top dimensions:
183 x 255 mm
Flexo 500 universal table
For the stationary use
of Metabo jig saws,
routers and circular
saws (when using
appropriate accessories)
With foldable stand and
height adjustment
Sturdy steel construction
and a large table top
made from continuous
strand casting
Table width extension
Increases the supporting surface;
ideal for large boards
Enables cuts with parallel guide
of up to 610 mm
Height adjustable
Suitable for: UK 333, UK 290,
Flexo 500
Length: 674 mm
Width: 501 mm
Lubricating stick
For lubricating the
jigsaw blades when
sawing metal
3 chip break guard plates
Suitable for:
ST 50 Pendix,
STE 70, STE 80 Quick
3 chip break guard plates
Suitable for: STE 100 Plus,
STE 135, STE 135 Plus,
STEB 135, STEB 135 Plus
Suction hose
With connector Ø 58 mm
for bayonet fitting and rubber
connector (internal Ø 30 mm,
outside Ø 35 mm)
Hose length: 3,5 m
Suction hose Ø: 27 mm
Carry case
For ST 50 Pendix, STE 70,
STE 80 Quick
Carry case
For STE 100 Plus, STE 105 Plus,
STEB 105 Plus, STE 135,
STE 135 Plus, STEB 135,
STEB 135 Plus
Metabox I for ST 50-STEB 135
For ST 50 Pendix, STE 70,
STE 80 Quick, STE 100 Plus,
STE 135 Plus, STEB 135 Plus
Dimensions: 395 x 295 x 105 mm
Order no.
6.31211
6.31031
6.23689
0910064304
GB
0910064401
GB
6.23443
6.31208
6.23665
6.31938
6.25450
6.25446
6.24639
| 197
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATION
GARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS

JIG SAW BLADES
WITH THESES ONE ALWAYS MAKES A GOOD CUT.
The features of the Metabo jig saw blades
198 198 |
Colour
The colour indicates for which material the blade is suited best.
Yellow for wood
Yellow with blue lettering for wood with nails
Blue for metal
Black for special applications
Basic blade material
HCS carbon steel, for cutting soft wood, hardboards, plastics
HSS High yielding high-speed steel, suitable for metal, aluminium work
BiM Bimetal especially flexible mix of HCS and HSS. The saw blades have a much higher life expectancy
(bimetal) than HCS and HSS and have proven their worth when there is danger of shaft-breaking
HM Hard-Metal (carbide) applicable to stainless steels, glass, re-inforced plastic, plastics, gypsum
plaster or cement fibre boards. Saw blades with HM-coating are suitable for cutting ceramic tiles
Quality class
>classic< series good results and very good service life
>professional< series fast, clean and precise angle-cutting with long service life
>pionier< series cuts fast through all materials ("through thick & thin")
>expert< series for special applications
Type
Teeth milled,
offset for clearance gap
A relative rough cut,
fast progress in cutting
on hard and soft wood,
aluminium, NE-metals
and plastics
Shank forms
Teeth milled,
waved for clearance
gap
A relative rough cut,
fast progress in cutting
hard and soft wood,
aluminium, NE-metals
and plastics
Teeth ground,
offset for clearance
gap
Fast cutting in hard
and soft wood
The jig-saw blades from Metabo are produced to all shank forms matching the
jig saws available from other brand names.
Single lug bayonet
shank
Teeth ground, offset
for clearance angle
and clearance gap
Fine and clean cut in
wood and plastics
U-Shank Makita-Shank Fine shank

Jig saw blades with single lug bayonet shank
Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil ...
Material suitability Version Material Usable
length
mm
FOR WOOD, "CLASSIC" SERIES
Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-15 mm,
Fibre boards 2-15 mm, Plastics,
Insulating material
Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-15 mm,
Fibre boards 2-15 mm, Plastics,
Insulating material, Saw blade
with insertion head
Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-20 mm,
Fibre boards 2-20 mm, Plastics,
Insulating material, Especially
for curved cuts
Hard wood, Soft wood,
Plastics, 4-50 mm,
For quick,
rough cuts
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood,
Chipboards,
Wood-core plywood 5-50 mm,
For quick cuts
Hard wood, Soft wood,
Chipboards, Wood-core
plywood 5-50 mm,
For quick cuts, Saw blade
with insertion head
Hard wood, Soft wood,
Chipboards,
Wood-core plywood 5-50 mm,
Especially for curved cuts
Hard wood, Soft wood,
Chipboards, Wood-core
plywood 5-50 mm,
Especially for curved cuts,
Saw blade with insertion head
Hard wood, Soft wood,
Chipboards, Wood-core
plywood 2-15 mm,
Fibre boards,
For quick cuts
Hard wood, Soft wood,
Chipboards, Wood-core
plywood, Fibre boards,
Constructional wood, Extra thick
Soft wood, Plywood,
Plastics, 1.5-5 mm,
Especially for curved cuts,
For clean cuts
Tooth
pitch
JIG SAW BLADES
Corresponds
to
Bosch type
Packing
unit
Order
no.
Milled, Crimped HCS 51 2,0 mm T 119 B 5 6.23631
Milled, Crimped HCS 66 1,9 - 2,3 mm/
23-17 TPI/
progressiv
T119B 5 6.23920
Milled, Crimped HCS 51 2,0 mm T 119 BO 5 6.23646
25 6.23605
Milled, Crossed HCS 74 3,0 mm T 111 C 3 6.23963
5 6.23632
25 6.23606
100 6.23714
Ground, Crossed HCS 74 4,0 mm T 144 D 3 6.23964
5 6.23633
25 6.23690
100 6.23712
Ground, Crossed HCS 74 4-5,2 mm/
6-5 TPI/
progressiv
T 144 D 5 6.23921
Ground, Crossed HCS 74 4,0 mm T 244 D 3 6.23966
5 6.23649
25 6.23607
100 6.23713
Ground, Crossed HCS 74 4-5,2 mm/
6-5 TPI/
progressiv
T 244 D 5 6.23960
Ground, Crossed HCS 126 4,0 mm T 344 D 5 6.23678
Ground, Crossed HCS 150 4,0 mm T 744 D 5 6.23603
Clearance angle
ground, Tapered
HCS 57 1,4 mm T 101 AO 5 6.23651
25 6.23624
| | 199 199
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATION
GARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS

JIG SAW BLADES
200 |
Material suitability Version Material Usable
length
mm
23634 HCS >professional< Holz/wood >>
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards, Plastics, 3-30 mm,
For clean cuts
Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre boards,
Plastics, 3-30 mm, For clean cuts,
Saw blade with insertion head
Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre boards,
Coated boards, 3-30 mm,
For clean cuts
Hard wood, Soft wood, Chipboards,
Wood-core plywood 10-45 mm,
Fibre boards 10-45 mm,
For clean cuts
Hard wood, Soft wood, Chipboards,
Wood-core plywood 10-45 mm,
Fibre boards 10-45 mm,
For clean cuts,
Saw blade with insertion head
Hard wood, Soft wood, Chipboards,
Wood-core plywood 4-60 mm,
Fibre boards 4-60 mm,
For clean cuts
Hard wood, Soft wood, Doors,
Kitchen worktops 5-50 mm,
For angle-precise cuts,
Extra thick
Hard wood, Soft wood, Chipboards,
Wood-core plywood 5-100 mm,
Fibre boards 5-100 mm,
For angle-precise cuts,
Extra thick
Kitchen worktops,
Hard wood 3-65 mm,
Soft wood 3-65 mm, Doors,
For angle-precise cuts,
Extra thick
Clearance angle
ground,
Teeth ground
Clearance angle
ground,
Teeth ground
Clearance angle ground,
Teeth ground,
Reverse toothed
Clearance angle
ground,
Teeth ground
Clearance angle
ground,
Teeth ground
Clearance angle
ground,
Teeth ground
Tooth
pitch
Corresponds
to
Bosch type
Packing
unit
Order
no.
HCS 74 2,5 mm T 101 B 3 6.23961
5 6.23634
25 6.23691
100 6.23703
HCS 74 2,7 mm/ 9 TPI T 101 B 5 6.23969
HCS 74 2,5 mm T 101 BR 5 6.23650
25 6.23608
100 6.23705
HCS 74 4,0 mm T 101 D 3 6.23962
5 6.23635
25 6.23609
100 6.23704
HCS 74 4-5,2 mm/
6-5 TPI/
progressiv
T 101 D 5 6.23923
HCS 91 3,0 mm T 301 CD 5 6.23654
Ground, Crossed HCS 74 4,0 mm T 144 DP 5 6.23694
Ground,
Teeth ground
Clearance angle
ground,
Teeth ground
FOR WOOD, "PROFESSIONAL" SERIES, BIM
Hard wood, Soft wood,
Coated boards, 5-50 mm,
For quick cuts
Hard wood, Soft wood,
Wood with nails,
Coated boards, 5-50 mm,
For quick cuts,
Saw blade with insertion head
Hard wood, Soft wood,
Coated boards, 5-100 mm,
For quick cuts
HCS 104 4,0 mm T 344 DP 5 6.23679
HCS 91 2,5 mm T 301 BCP 5 6.23685
Ground, Crossed BiM 74 4,0 mm T 144 DF 5 6.23976
Ground, Crossed BiM 74 4-5,2 mm/
6-5 TPI/
progressiv
T 144 DF 5 6.23933
Ground, Crossed BiM 126 4,0 mm T 344 DF 5 6.23980

Material suitability Version Material Usable
length
mm
Especially for laminate,
Laminated flooring, Hard wood,
Soft wood, Coated boards,
Plywood, Especially for curved cuts,
For clean cuts
Especially for laminate,
Laminated flooring, Hard wood,
Soft wood, Coated boards,
Plastics, 2-30 mm, For clean cuts
Hard wood, Soft wood,
Laminated flooring,
Coated boards,
Plastics, 3-30 mm,
For clean cuts,
Saw blade with insertion head
Especially for laminate,
Laminated flooring,
Kitchen worktops 3-30 mm,
Coated boards,
For clean cuts
Hard wood,
Soft wood,
Coated boards, 4-60 mm
Hard wood, Soft wood,
Chipboards,
Glued woods 5-80 mm,
Fibre glass reinforced
plastics, 5-30 mm,
For quick cuts
Hard wood, Soft wood,
Wood with nails,
Non-ferrous metals, Plastics
FOR WOOD, "PIONEER" SERIES
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards,
For quick cuts
UNIVERSAL, "PIONEER" SERIES
Wood, Wood with nails,
Metal, Non-ferrous metals,
Plastics
FOR METAL, "CLASSIC" SERIES
Sheet steel, 0.5-1.5 mm,
Non-ferrous metals
Sheet steel, 1-3 mm,
Non-ferrous metals
Sheet steel, 1-3 mm,
Non-ferrous metals,
Especially for curved cuts
Clearance angle
ground,
Teeth ground,
Tapered
Clearance angle
ground,
Teeth ground,
Tapered
Clearance angle
ground,
Teeth ground
Clearance angle
ground,
Teeth ground,
Reverse toothed
Clearance angle
ground,
Teeth ground
Clearance angle
ground,
Teeth ground
Tooth
pitch
JIG SAW BLADES
Corresponds
to
Bosch type
Packing
unit
Order
no.
BiM 57 1,4 mm T 101 AOF 5 6.23695
BiM 74 1,7 mm T 101 AIF 5 6.23948
BiM 74 2,7 mm T 101 BF 5 6.23975
BiM 74 2,5 mm T 101 BRF 5 6.23686
BiM 91 3,0 mm T 301 CDF 5 6.23696
BiM 105 3,0 mm T 301 CLF 5 6.23977
Ground BiM 90 2,5 mm T 111 HF 5 6.23949
Clearance angle
ground,
Teeth ground
HCS 91 2,0-3,0 mm,
progressiv
Crossed, Milled BiM 106 2,4-5,0 mm,
progressiv
T 234 X 5 6.23675
25 6.23617
T 345 XF 5 6.23677
25 6.23621
Milled, Crimped HSS 66 0,7 mm T 118 G 3 6.23967
5 6.23636
25 6.23693
Milled, Crimped HSS 51 1,2 mm T 118 A 3 6.23965
5 6.23637
25 6.23692
100 6.23706
Milled, Crimped HSS 51 1,2 mm T 218 A 5 6.23647
| 201
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATION
GARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS

JIG SAW BLADES
202 |
Material suitability Version Material Usable
length
mm
Sheet steel, 1-3 mm,
Non-ferrous metals,
Saw blade with insertion head
Sheet steel, 1-3 mm,
Non-ferrous metals,
Especially for curved cuts,
Saw blade with insertion head
Sheet steel, 1-3 mm,
Non-ferrous metals,
sandwich materials
Sheet steel, 2.5-6 mm,
Non-ferrous metals
Sheet steel, 2.5-6 mm,
Non-ferrous metals,
Saw blade with insertion head
Tooth
pitch
Milled, Crimped HSS 66 1,1-1,5 mm/
23-17 TPI/
progressiv
Milled, Crimped HSS 66 1,1-1,5 mm/
23-17 TPI/
progressiv
Corresponds
to
Bosch type
Packing
unit
Order
no.
T 118 A 5 6.23924
T 218 A 5 6.23926
Milled, Crimped HSS 106 1,2 mm T 318 A 5 6.23629
25 6.23623
100 6.23716
Milled, Crimped HSS 51 2,0 mm T 118 B 5 6.23638
25 6.23618
100 6.23707
Milled, Crimped HSS 66 1,9-2,3 mm/
13-11 TPI/
progressiv
T 118 B 5 6.23925
Sheet steel, 2.5-6 mm,
Non-ferrous metals
Milled, Crimped HSS 106 2,0 mm T 318 B 5 6.23697
FOR METAL, "PROFESSIONAL" SERIES
Sheet steel, 1-3 mm,
Non-ferrous metals
Sheet steel, 1-3 mm,
Non-ferrous metals,
Saw blade with
insertion head
Sheet steel, 1-3 mm,
Sandwich materials 2-65 mm,
Non-ferrous metals, Plexiglas
Sheet steel, 2.5-6 mm,
Sandwich materials 2-65 mm,
Non-ferrous metals, Plexiglas
Sheet steel, 1.5 4 mm,
Especially for curved cuts
Sheet steel, 2.5-6 mm,
Non-ferrous metals
Sheet steel, 2.5-6 mm,
Non-ferrous metals,
Saw blade with
insertion head
Sheet steel, 2.5-6 mm,
Sandwich materials 2-120 mm,
Non-ferrous metals, Plexiglas
Sheet steel, 2-5 mm,
Non-ferrous metals
Milled, Crimped BiM 57 1,2 mm T 118 AF 5 6.23971
100 6.23708
Milled, Crimped BiM 66 1,1-1,5 mm/
23-17 TPI/
progressiv
T 118 AF 5 6.23950
Milled, Crimped BiM 106 1,1 mm T 318 AF 5 6.23978
Milled, Crimped BiM 106 1,8 mm T 318 BF 5 6.23979
Milled, Crimped BiM 57 1,5 mm T 118 EOF 5 6.23970
Milled, Crimped BiM 57 2,0 T 118 BF 5 6.23973
Milled, Crimped BiM 66 1,9-2,3 mm/
13-11 TPI/
progressiv
T 118 BF 5 6.23929
Milled, Crossed BiM 150 2,0 mm T 718 BF 5 6.23604
Milled, Crimped BiM 50 1,5 mm T 118 EF 5 6.23972

Material suitability Version Material Usable
length
mm
FOR METAL, "PIONEER" SERIES
Sheet steel, 1.5-10 mm,
Non-ferrous metals up to 30 mm
Tooth
pitch
Milled, Crossed HSS 74 1,4 - 2,6 mm,
progressiv
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Plastics,
For quick cuts
Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Especially for curved cuts
JIG SAW BLADES
Corresponds
to
Bosch type
Packing
unit
Order
no.
T 123 X 5 6.23676
25 6.23620
Milled, Crossed HSS 74 3,0 mm T 127 D 5 6.23639
25 6.23622
100 6.23709
Milled, Crossed HSS 74 3,0 mm T 227 D 5 6.23648
Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Plastics, For quick cuts
Milled, Crossed BiM 75 3,0 mm T 127 DF 5 6.23974
FOR STAINLESS STEEL, "EXPERT" SERIES
Stainless steel sheets (Inox) 1-2 mm,
Non-ferrous metals
Stainless steel sheets (Inox) 2-4 mm,
Non-ferrous metals
FOR PLASTICS, "EXPERT" SERIES
Ground carbide 57 1,1 mm T 118 AHM 3 6.23662
Ground carbide 57 1,4 mm T 118 EHM 3 6.23663
Fibre glass reinforced plastics,
Corian 4-60 mm
Ground carbide 91 3,3 mm T 301 CHM 3 6.23687
FOR GYPSUM CARTON/CEMENT MATERIALS, "EXPERT" SERIES
Gypsum plaster,
Cement fibre boards 5-50 mm,
Fibre glass reinforced
plastics, 5-20 mm,
Gypsum plaster,
Cement fibre boards 5-80 mm,
Fibre glass reinforced
plastics, 5-50 mm,
FOR PLEXIGLAS, "EXPERT" SERIES
Plexiglas, Polycarbonate 2-20 mm,
Non-ferrous metals 2 -10 mm
FOR SOFT MATERIALS, "EXPERT" SERIES
Expanded polystyrene, Cardboard,
Leather, Rubber, Carpet up to 50 mm
Expanded polystyrene, Cardboard,
Leather, Rubber, Carpet up to 50 mm
Ground carbide 74 4,3 mm T 141 HM 1 6.23652
Ground carbide 106 4,3 mm T 341 HM 1 6.23688
3 6.23671
Clearance angle ground,
Teeth ground
Knife-blade ground,
Straight
Knife-blade ground,
Crimped
FOR CERAMIC MATERIALS, "EXPERT" SERIES
Ceramic, Glass,
Fibre glass reinforced plastics,
Cast iron
Ceramic, Glass,
Fibre glass reinforced plastics,
Cast iron
Coarse Carbide,
coated
Fine Carbide,
coated
HSS 74 2,0 mm T 101 A 5 6.23640
HCS 74 T 113 A 5 6.23641
HCS 126 T 313 AW 3 6.23684
76 - T 130 Riff 1 6.23657
76 - T 150 Riff 1 6.23658
| 203
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATION
GARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS

JIG SAW BLADES
Jig saw blades with Fein shank
Suitable for FEIN jig saws
204 |
Material suitability Version Material Usable
length
mm
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 10-40 mm
Hard wood, Soft wood,
Wood-core plywood,
Fibre boards 10-40 mm
FOR METAL, "CLASSIC" SERIES
Clearance angle ground,
Teeth ground
Clearance angle ground,
Teeth ground
Tooth
pitch
Corresponds
to
Bosch type
Packing
unit
Order
no.
HCS 60 3,0 mm F 1 C 5 6.23992
HCS 60 4,0 mm F 1 D 5 6.23993
Sheet steel, 0.5-1.5 mm Milled, Crimped HSS 50 0,7 mm F 18 G 5 6.23996
FOR METAL, "PROFESSIONAL" SERIES
Sheet steel, 1-3 mm Milled, Crimped BiM 60 1,2 mm F 18 AF 5 6.23994
Sheet steel, 2.5-6 mm,
Plastics
Milled, Crimped BiM 60 2,0 mm F 18 BF 5 6.23995
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium,
Non-ferrous metals 3-15 mm,
Pipes up to 30 mm,
Profiles up to 30 mm
Jig saw blades with universal shank
Suitable for Black & Decker, Skil, Kress and others
Milled, Crossed BiM 75 3,0 mm F 127 DF 5 6.23997
Material suitability Version Material Usable
length
mm
FOR WOOD, "CLASSIC" SERIES
Tooth pitch Corresponds
to Bosch
type
Packing
unit
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 5-50 mm,
For clean cuts
Milled, Crossed HCS 74 3,0 mm U 111 C 5 6.23945
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards 5-50 mm
Hard wood, Soft wood,
Plywood,
Coated boards, 1.5-15 mm,
Especially for curved cuts
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 10-45 mm,
For clean cuts
Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre
boards 10-45 mm, For clean cuts
Order
no.
Ground, Crossed HCS 82 4,0 mm U 144 D 5 6.23944
Clearance angle ground,
Tapered
Clearance angle ground,
Teeth ground
Clearance angle ground,
Teeth ground
HCS 52 1,3 mm U 1 AO 5 6.23936
HCS 82 2,5 mm U 101 B 5 6.23943
HCS 82 4,0 mm U 101 D 5 6.23942

Material suitability Version Material Usable
length
mm
FOR WOOD, "PROFESSIONAL" SERIES, BIM
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 5-50 mm,
For quick cuts
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 3-30 mm,
Coated boards,
For clean cuts
FOR WOOD, "PIONEER" SERIES
Hard wood, Soft wood, Chipboards,
Wood-core plywood,
Fibre boards 2-65 mm,
For quick cuts
Tooth pitch Corresponds
to Bosch
type
JIG SAW BLADES
Packing
unit
Order
no.
Ground, Crossed BiM 74 4,0 mm U 144 DF 5 6.23904
Clearance angle ground,
Teeth ground
Clearance angle ground,
Teeth ground
FOR WOOD AND METAL, "PIONEER" SERIES
Wood, Wood with nails,
Metal, Non-ferrous metals,
Plastics
FOR METAL, "CLASSIC" SERIES
BiM 82 2,5 mm U 101 BF 5 6.23905
HCS 90 2,0-3,0 mm,
progressiv
Milled, Crossed BiM 107 2,4 - 5,0 mm,
progressiv
U 234 X 5 6.23903
U 345 XF 5 6.23906
Sheet steel, 0.5-1.5 mm Milled, Crimped HSS 52 0,7 mm U 118 G 5 6.23938
Sheet steel, 1-3 mm Milled, Crimped HSS 52 1,2 mm U 118 A 5 6.23941
Sheet steel, 2.5-6 mm Milled, Crimped HSS 52 2,0 mm U 118 B 5 6.23940
FOR METAL, "PROFESSIONAL" SERIES
Sheet steel, 1-3 mm Milled, Crimped BiM 52 1,2 mm U 118 AF 5 6.23907
Sheet steel, 2.5-6 mm Milled, Crimped BiM 74 2,0 mm U 118 BF 5 6.23937
FOR METAL, "PIONEER" SERIES
Sheet steel, 1.5-10 mm,
Pipes, Profiles up to 30 mm
Milled, Crossed HSS 74 1,2 - 2,6 mm,
progressiv
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium, Non-ferrous
metals 3-15 mm, Pipes,
Profiles up to 30 mm
U 123 X 5 6.23909
Milled, Crossed HSS 74 3,0 mm U 127 D 5 6.23939
| 205
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATION
GARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS

JIG SAW BLADES
Jig saw blades with Makita shank
Suitable for Makita jigsaws
206 |
Material suitability Version Material Usable
length
mm
FOR WOOD, "CLASSIC" SERIES
Soft wood, Plywood, Chipboards,
Wood-core plywood,
Fibre boards 3-15 mm,
Especially for curved cuts
Tooth
pitch
Corresponds
to
Bosch
type
Packing
unit
Order
no.
Milled, Crossed HCS 62 2,5 mm MA 119 HO 5 6.23958
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 4-50 mm,
For rough cuts
Milled, Crossed HCS 62 3,0 mm MA 111 C 5 6.23955
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 4-50 mm,
For quick cuts
Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards, Plastics, 3-30 mm,
For clean cuts
FOR WOOD, "PIONEER" SERIES
Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards 2-65 mm,
For quick cuts, For clean cuts
Ground, Milled HCS 82 3,0 mm MA 144 CD 5 6.23919
Clearance angle
ground,
Teeth ground
Clearance angle
ground,
Teeth ground
FOR WOOD AND METAL, "PIONEER" SERIES
Wood, up to 65 mm,
Wood with nails, Metal sheets,
Pipes, Aluminium,
Plastics, 3-10 mm
FOR METAL, "CLASSIC" SERIES
HCS 62 2,7 mm MA 101 BC 5 6.23959
HCS 92 progressiv,
2,0-3,0 mm
Milled, Crossed BiM 102 progressiv,
2,5-5,0 mm
MA 234 X 5 6.23911
MA 345 XF 5 6.23912
Sheet steel, 1-3 mm Milled, Crimped HSS 62 1,0 mm MA 118 A 5 6.23957
Sheet steel, 2.5-6 mm, Milled, Crimped HSS 62 1,8 mm MA 118 B 5 6.23956
FOR METAL, "PROFESSIONAL" SERIES
Sheet steel, 1-3 mm Milled, Crimped BiM 62 1,0 mm MA 118 AF 5 6.23916
Sheet steel, 2.5-6 mm Milled, Crimped BiM 62 1,8 mm MA 118 BF 5 6.23917
FOR METAL, "PIONEER" SERIES
Sheet steel, 1-10 mm, Pipes,
Profiles up to 30 mm
Milled, Crossed HSS 77 progressiv,
1,0-2,6 mm
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium, Non-ferrous
metals 3 -15 mm, Pipes,
Profiles up to 30 mm
MA 123 X 5 6.23914
Milled, Crossed HSS 62 3,0 mm MA 127 D 5 6.23918