Precision.

Metal Tube Cutter
The clever solution for cutting metal tubes manually. This Metal Tube Cutter is especially
designed for cramped working places and for chipless cutting processes.
• Deformation-free and square cut
• No electricity required
• Chipless cutting procedure
• Requires little space, for use in limited access areas
MRA
For manual cutting of metal tubes.
Easy to use – first-rate cutting technology.
For tube materials:
• Stainless steel (special steel material no. 1.40... – 1.45... as per DIN 17 455 and DIN 17 456)
• Low alloy and unalloyed steel
• Aluminum
• Cast materials
• Non-ferrous metals
• PVDF plastic
Versions:
MRA HP
Metal Tube Cutter for high-purity applications. Only applicable with the HP multi-roller
cutting chain (Code 790 008 014).
Scope of delivery:
• 1 Metal Tube Cutter MRA*
• 1 Plastic carrying case (ABS)
• 1 Socket head key
• 1 Connection clamp
• 1 Tube of lubricating compound GF TOP (Code 790 060 228)**
• 1 Pair of working gloves
• 1 Operating instructions with spare parts list
* without multi-roller cutting chains and without clamping shells (see accessories)
** not with MRA HP
Application range [mm] [inch]
Tube OD 33.7 - 254.0 1.327 - 10.000
Wall thickness (depends on material) 0.8 - 3.0 0.031 - 0.118
Article Version Code kg
Metal Tube Cutter MRA Standard 790 008 001 8.000
Metal Tube Cutter MRA HP 790 008 002 8.000
Pipe Cutting and Beveling Technology
orbitalum tools gmbh Freibühlstraße 19 D-78224 Singen Phone +49 (0) 77 31 792 - 0 Fax +49 (0) 77 31 792 - 524 www.orbitalum.com
23