04.08.2013 Views

uvc - ozone - heating - aeration 2013 - SIBO

uvc - ozone - heating - aeration 2013 - SIBO

uvc - ozone - heating - aeration 2013 - SIBO

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

UVC - OZONE - HEATING - AERATION<br />

Retail prices excl. VAT<br />

7 - 15<br />

OZONE<br />

AQUAFORTE KOIZO³ OZONE CELL code 843<br />

The worlds 1st ultra compact low-voltage <strong>ozone</strong> generator for reducing algae & germs<br />

Ozone has traditionally been a topic of hot debate among professional koi keepers. The fact is that <strong>ozone</strong> possesses<br />

loads of highly valuable characteristics, it removes colourants from the water; it converts toxic nitrite into relatively<br />

harmless nitrate; it removes bacteria, viruses and other pathogens; it kills green algae; and it raises the oxygen content of the water.<br />

The AquaForte KOIZO³ Ozone Cell produces <strong>ozone</strong> from water!<br />

A process of electrolysis is used to break down water into its two component parts: oxygen and hydrogen. The Ozone Cell also<br />

releases single oxygen atoms (i.e. O rather than O2 atoms) that instantly combine with oxygen molecules (O2) to form <strong>ozone</strong> (i.e. O3).<br />

Ozone is a highly reactive substance and tries to revert straightaway to its original form, thus causing the extra oxygen atom te react<br />

with an organic substance such as nitrite, a colourant, algae or a virus, which are then ‘incinerated’ by oxidation. The substance that<br />

remains after this oxidation process is pure oxygen. The <strong>ozone</strong> leaves the Micro Ozone Cell in the form of tiny bubbles of gas. This is<br />

the great advantage of a succesful waterbased reaction: the smaller the particles, the better.<br />

The Ozone Micro Cell is supplied with a Soft Water Module. This unit has to be filled with distilled/deionized water. The cell core is<br />

fitted directly into the module so the cells are only in contact with pure water. The <strong>ozone</strong> produced leaves the module through a small<br />

stainless steel capillary pipe that holds an <strong>ozone</strong> hose. This <strong>ozone</strong> hose has a 3/8" fitting to connect with the pond pipe system to<br />

perform its oxidizing cycle. The only maintenance required is refilling the module with distilled water. The life-span of the <strong>ozone</strong> cells<br />

in this module is extended to at least one year! An additional benefit is the user can see the cell continuously at work by means of<br />

the rising <strong>ozone</strong> bubbles. The Soft Water Module is supplied with a handy wall bracket for easy installation. The Ozone Micro Cell<br />

KOIZO³ 4 Cells is now standard equipped with this module.<br />

<strong>ozone</strong> gas<br />

TYPE ARTNR. EURO<br />

Soft Water Module for Ozone Micro Cell SL218 105,00<br />

capilllary<br />

KOIZO³ 4 cells incl. Soft Water Module<br />

Cell Core Replacement Set (4 pieces)<br />

SL224<br />

SL226<br />

519,00<br />

70,05<br />

<strong>ozone</strong><br />

distilled<br />

water<br />

<strong>ozone</strong><br />

micro cell<br />

For redox meters see page 7-36<br />

fitting<br />

1½” Male<br />

thr.<br />

<strong>ozone</strong> bubbles<br />

pond water<br />

AQUAFORTE OZONE REACTOR code 828<br />

Compact <strong>ozone</strong> reactor with a special compartment for activated carbon to destroy residual <strong>ozone</strong>. Ideal for<br />

removing (yellow/brown) colorants from the water with the use of <strong>ozone</strong>. Ozone generator is not included! Suited for<br />

<strong>ozone</strong> generators up to 500mg/h. Use pre-filtered water! Inlet: 40mm, outlet: 50mm. Procedure: water & <strong>ozone</strong> enter<br />

the mixing chamber through a venturi. The water then<br />

showers down the small holes into the reaction chamber<br />

where the <strong>ozone</strong> can do its job. The reaction chamber is<br />

fitted with a hose connector to re-use residual <strong>ozone</strong> from<br />

this area and mix it once more with the water inlet. The unit<br />

also has a residual <strong>ozone</strong> destroyer for outgoing air that<br />

can be filled with activated carbon. The water has to leave<br />

inlet 40mm<br />

the system through the activated carbon chamber which<br />

will remove any residual <strong>ozone</strong> from the water. Replace<br />

residual <strong>ozone</strong><br />

destroyer<br />

activated carbon every 3 months! The inlet chamber and<br />

activated carbon chamber are easy accessible for<br />

maintenance. Total height: 58cm. Diameter: 250mm.<br />

Max. flow: ± 5m³/h.u.<br />

58cm<br />

for air<br />

TYPE ARTNR. EURO<br />

Ozone Reactor SK946 490,00<br />

AquaJet 2000 Venturi SC240 15,40<br />

reaction<br />

chamber<br />

inlet chamber<br />

hose<br />

connetor<br />

for residual<br />

<strong>ozone</strong><br />

return<br />

50mm<br />

area for<br />

activated<br />

carbon<br />

February <strong>2013</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!