Air Cooler / Humidifier User's Manual - Maplin Electronics

4. Rinse with clean tap water
5. To remove scales or lime deposits, fill the water tank with water and a
mixture of 200ml of white vinegar. Use a soft cloth or soft brush to
clean the tank
6. For external cleaning only use mild detergents. Do not use products
containing alcohol or benzene
Storage
1. Clean and dry the air cooler thoroughly as per the cleaning instructions
above
2. Ensure all components are dry. Do not leave any water in the air cooler
when storing. Water left in the air cooler may cause deposits or
bacterial growth which could impair the units performance
Whilst Using the Air Cooler
When using this unit the external of the appliance may create condensed
water drips due to the ambient temperature and relative humidity conditions.
The water drips are not due to malfunction or leakage of the unit. Please
remove water drips with a soft cloth and if necessary place a tray under the
unit
Maintenance
Discharge the water reservoir regularly and dry the unit
in a well-ventilated place. To discharge the water remove
the plug at the back of the unit
If the power cord is damaged it must be fixed by its service agent, or a
similarly qualified person on order to avoid electric shock hazard
After discharging the water, make sure the internals of the unit is completely
dry. To speed up the drying you may turn on the air cooler and press the
‘high’ speed switch. It takes approximately one hour to dry the unit
completely
Offensive odour or weak airflow can result from particles attached to the back
filter pad. Remove the filter pad, wash it in neutral detergent and dry before
replacing
To clean the outside of the unit wipe with a soft cloth
Never immerse the complete unit in water
Never use chemical solutions such as bleach or oil on the casing