GR DIGITAL Camera User Guide

44
Using the Flash
Press the F (Flash) button to switch between flash modes. By
default, your camera is set to Flash Off.
From the front edge of the lens, flashlight reaches about 0.2 to 3.0 m
when ISO sensitivity is set to AUTO.
Flash Modes
1. Make sure the camera power is on and turn the mode dial to
5, P, A, M, or SCENE.
2. Press the F (Flash) button to switch between flash modes.
The Flash mode mark appears momentarily in a large size at the center of
the LCD monitor and then is displayed at the upper left.
During flash charging, the flash lamp keeps blinking. Once the flash is
charged, the lamp goes off and it is possible to shoot.
Note
Flash Off The flash will not fire.
Auto When your subject is poorly lit or backlit, the flash fires automatically.
Red-eye reduction Reduces the red-eye phenomenon, in which people's eyes appear red
when shooting images of people.
Forced Flash The flash fires, whatever the light conditions are, when you shoot.
Slow Synchro The flash fires with the shutter speed slowed. This is suitable when taking
portrait pictures in a nightscape. It is recommended to use a tripod.
External flash Indicates that the external flash is attached.
• When shooting in a dark place, the flash cover pops up automatically. After shooting, press
down the flash cover in place.
• When other than the lithium-ion battery is used, the flash lamp icon is not displayed on the
LCD monitor during flash charging.
• The settings are saved until you press the F (Flash) button to change them.
• When shooting movies or in Multi-Shot mode, the flash turns off.
• The flash fires twice to increase the AE/AF (Auto Exposure/Auto Focus) accuracy.
• The camera has a hot shoe, allowing you to attach an external flash (available in stores).
(P.45)