Technical Data Sheet - Octopart

More documents

Recommendations

Info

30 STYLE A/D STYLE F 2 Pin 3 Pin CASE CODE (COMPONENT WEIGHT grams - nom.) DIA. mm Negative denoted by line on sleeve STYLE C/E STYLE G/H 4 Pin 5 Pin Mounting These capacitors are designed to be mounted by their terminations alone, and may be used in any position. Dummy pins must be isolated on 4 and 5 pin styles. LENGTH mm ±2 -0+1 30 35 40 45 50 55 60 80 105 22 AB (25) AC (26) AD (30) 25 BB (28) BC (30) BD (35) 30 CB (35) CC (40) CD (45) CE (50) CF (55) 35 DB (42) DC (50) DD (55) DE (65) DF (70) DG (75) DH (80) DL (105) 40 EB (49) EC (57) ED (65) EE (80) EF (82) EG (95) EH (98) EL (131) EP (170) 45 FB (62) FC (72) FD (82) FE (92) FF (103) FG (113) FH (123) FL (164) FP (215) 50 KB (75) KC (88) KD (100) KE (113) KF (126) KG (138) KH (151) KL (201) KP (264) Other sizes available upon request TERMINAL STYLE case sizes DESCRIPTION 2 pin standard 2 pin short 3 pin short 4 pin standard 4 pin short 5 pin standard 5 pin short PIN LENGTH 6.3±1 4.0±1 4.0±1 6.3±1 4.0±1 6.3±1 4.0±1 CODE A D F C E G H DIA. mm -0+1 22 25 30 35 40 45 50
TECHNICAL DATA Related documents IEC 384-4 Temperature range ALC10: Storage –55°C to +85°C Operating –40°C to +85°C Environmental classification 40/085/56 ALC40: Storage –55°C to +105°C Operating –40°C to +105°C Environmental classification 40/105/56 Surge voltage 1000 surges (30 seconds) at 85°C (ALC10) and 105°C (ALC40) with surge voltage applied. See electrical characteristics for more details. Charge/discharge 10 6 cycles at 25°C and rated voltage. One cycle per second with a time constant of 0.1. D.C. leakage current After application of rated d.c. voltage for 5 minutes at 20°C, the d.c. leakage current shall not exceed (0.006 C r U r ) µA. Where C r is the rated capacitance in µF and U r is the rated d.c. voltage. Vibration 10Hz to 500Hz at 0.75mm or 10g for 3x2hrs duration. 10Hz to 55Hz at 0.35mm or 5g for 3x0.5hrs duration (45/ 50mm diameter cans). Insulation resistance > 100MΩ at 100V d.c., across insulating sleeve. Voltage proof > 2500V d.c., across insulating sleeve. Ripple current The following values are approximate only, to give an indication of the effects of frequency and temperature on ripple current. More accurate data can be obtained by referring to the Application Notes available from BHC. FREQUENCY CORRECTION - ALC10/40 Capacitors shall withstand the rated r.m.s. ripple current as given in the tables at upper category temperature in circulating air. For frequencies other than those shown the following formula should be used: Ripple current = A = 100Hz ripple current B = 10kHz ripple current F = Required frequency (Hz) F X A 2 X B 2 100 X (B 2 - A 2 ) + (F X A 2 ) TEMPERATURE CORRECTION - ALC10 For ambient temperatures other than 85°C the following correction factors should be employed. AMBIENT TEMPERATURE FACTOR 30°C 2.5 50°C 2.1 70°C 1.6 85°C 1.0 TEMPERATURE CORRECTION - ALC40 For ambient temperatures other than 105°C the following correction factors should be employed. AMBIENT TEMPERATURE FACTOR 50°C 2.5 60°C 2.4 70°C 2.2 85°C 1.8 105°C 1.0 N.B. The sum of the d.c. and a.c. voltage components should not exceed the d.c. voltage rating. Life expectancy At rated temperature with rated voltage and ripple current applied. CAN DIAMETER RANGE LIFE EXPECTANCY (mm) (hours) 22 ALC10 8000 22 ALC40 4000 25 ALC10 10000 25 ALC40 6000 30 ALC10 13000 30 ALC40 7000 35 ALC10 15000 35 ALC40 8000 40, 45, 50 ALC10 18000 40, 45, 50 ALC40 9000 Capacitor marking The capacitors are marked with items 1 to 6 from the following list as a minimum, and as much of the remaining information as is practical. 1. Rated capacitance in µF 2. Rated voltage d.c. 3. Polarity of terminations 4. Tolerance on rated capacitance 5. Date code/Batch number 6. BHC part number 7. Environmental classification technical data 31
Page 1 and 2: part of the EVOX RIFA GROUP
Page 3 and 4: REFERENCE DATA Quick reference guid
Page 5 and 6: Cap µF 33 47 68 100 150 220 330 47
Page 7 and 8: Optimised Design Service Approximat
Page 9 and 10: The manufacturing process begins wi
Page 11 and 12: Inductance Some inductance is prese
Page 13 and 14: Advantages Simple construction In
Page 15 and 16: mounting method, which is at a high
Page 17 and 18: 5. DISPOSAL Aluminium Electrolytic
Page 19 and 20: series Listed here are only samples
Page 21 and 22: DIMENSIONS (sleeved) mm TECHNICAL D
Page 23 and 24: Rated voltage d.c. 16V d.c. (18.4V
Page 25 and 26: Rated voltage d.c. 350V d.c. (385V
Page 27 and 28: Rated voltage d.c. 10V d.c. (11.5V
Page 31: series Listed here are only samples
Page 35 and 36: Rated voltage d.c. 35V d.c. (40V su
Page 41 and 42: Rated voltage d.c. 35V d.c. (40V su
Page 45 and 46: A high CV range of snap-in capacito
Page 49 and 50: series Listed here are only samples
Page 51 and 52: ALP Pin and mounting configurations
Page 53 and 54: SLIT FOIL CAPACITORS Modern electro
Page 55 and 56: INSULATED VERSION M8 Stud (M12 Stud
Page 57: SPECIAL PART NUMBERS Used when the

Technical Data Sheet - Octopart

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?