Heat Transfer in Microchannels - coolingZONE

More documents

Recommendations

Info

Optimization of Microchannels Kandlikar and Grande, pg. 9 How should the channels in the silicon substrate be designed for optimal heat transfer? Should the channel be deep or shallow? Make sure to give a valid reason.
Optimization of Microchannels Kandlikar and Grande, pg. 9 The channels should be deep so that the hydraulic diameter is small but the channel surface area is large. Caution: Making the channels too small may result in unreasonable pressure drop.
Page 1 and 2: Fundamentals of Liquid Cooling Ther
Page 3 and 4: Using Alternate Coolants As electr
Page 5 and 6: Fluid Selection Is the fluid in di
Page 7 and 8: Example: Thermal Conduction Module
Page 9 and 10: Motivating Example Laminar flow thr
Page 11: Pressure Drop Example If chip powe
Page 15 and 16: Mini-Pumps Microchannel Issues Abl
Page 17 and 18: Current Research for Single Phase C
Page 19 and 20: Benefits of using a jet in thermal
Page 21 and 22: Classify the Following Jets Incrope
Page 23 and 24: Nozzle Design Nozzles are designed
Page 25 and 26: Degradation of Heat Transfer During
Page 27 and 28: Two-Phase Boiling in Microchannels
Page 29 and 30: Immersion (Direct) Cooling In dire
Page 31 and 32: Boiling Used in Immersion Cengel, p
Page 33 and 34: Cray-2 Supercomputer Cold fluid en
Page 35: Sources Cengel, Yunus A. Heat Tran

Heat Transfer in Microchannels - coolingZONE

Create successful ePaper yourself

Delete template?

Save as template?