Heat Transfer in Microchannels - coolingZONE

More documents

Recommendations

Info

Flow Regions Stagnation Region – Jet flow is decelerated normal to the impingement surface and accelerated parallel to it. Hydrodynamic and thermal boundary layers are uniform. Wall Jet Region – Boundary layers begin to grow Incropera, pg. 62
Degradation of Heat Transfer During Jet Impingement Splattering – Droplets are eject from the wall jet region due to the distance the nozzle is from the heat source and the surface tension of the jet fluid Hydraulic Jump – An abrupt increase in film thickness and reduction in film velocity occurring in the wall jet region
Page 1 and 2: Fundamentals of Liquid Cooling Ther
Page 3 and 4: Using Alternate Coolants As electr
Page 5 and 6: Fluid Selection Is the fluid in di
Page 7 and 8: Example: Thermal Conduction Module
Page 9 and 10: Motivating Example Laminar flow thr
Page 11 and 12: Pressure Drop Example If chip powe
Page 13 and 14: Optimization of Microchannels Kandl
Page 15 and 16: Mini-Pumps Microchannel Issues Abl
Page 17 and 18: Current Research for Single Phase C
Page 19 and 20: Benefits of using a jet in thermal
Page 21 and 22: Classify the Following Jets Incrope
Page 23: Nozzle Design Nozzles are designed
Page 27 and 28: Two-Phase Boiling in Microchannels
Page 29 and 30: Immersion (Direct) Cooling In dire
Page 31 and 32: Boiling Used in Immersion Cengel, p
Page 33 and 34: Cray-2 Supercomputer Cold fluid en
Page 35: Sources Cengel, Yunus A. Heat Tran

Heat Transfer in Microchannels - coolingZONE

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?