Heat Transfer in Microchannels - coolingZONE

More documents

Recommendations

Info

Typical Liquids Used in Immersion Cengel, pg. 920
Boiling Used in Immersion Cengel, pg. 918 Electronics expel heat into the liquid Vapor bubbles are formed in the liquid The vapor is collected at the top of the enclosure where it comes in contact with some sort of heat exchanger The vapor condenses and returns to the liquid portion of the reservoir
Page 1 and 2: Fundamentals of Liquid Cooling Ther
Page 3 and 4: Using Alternate Coolants As electr
Page 5 and 6: Fluid Selection Is the fluid in di
Page 7 and 8: Example: Thermal Conduction Module
Page 9 and 10: Motivating Example Laminar flow thr
Page 11 and 12: Pressure Drop Example If chip powe
Page 13 and 14: Optimization of Microchannels Kandl
Page 15 and 16: Mini-Pumps Microchannel Issues Abl
Page 17 and 18: Current Research for Single Phase C
Page 19 and 20: Benefits of using a jet in thermal
Page 21 and 22: Classify the Following Jets Incrope
Page 23 and 24: Nozzle Design Nozzles are designed
Page 25 and 26: Degradation of Heat Transfer During
Page 27 and 28: Two-Phase Boiling in Microchannels
Page 29: Immersion (Direct) Cooling In dire
Page 33 and 34: Cray-2 Supercomputer Cold fluid en
Page 35: Sources Cengel, Yunus A. Heat Tran

Heat Transfer in Microchannels - coolingZONE

Create successful ePaper yourself

Delete template?

Save as template?