LEDmin MKII_Typ_W_com_0911 - Pintsch Aben
LEDmin MKII_Typ_W_com_0911 - Pintsch Aben
LEDmin MKII_Typ_W_com_0911 - Pintsch Aben
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LED Obstacle light<br />
<strong>LEDmin</strong> <strong>MKII</strong> „Feuer W rot“ and „Feuer W-ES rot“<br />
The PINTSCH BAMAG LED obstacle light of the type<br />
<strong>LEDmin</strong> <strong>MKII</strong> „Feuer W rot“ is specially used on wind<br />
turbines, which has to be in accordance to AVV for marking<br />
of aviation obstructions, from the Federal Ministry of<br />
Transport, Building and Urban Affairs, issued on 28.04.2007.<br />
In the design <strong>LEDmin</strong> <strong>MKII</strong> „Feuer W–ES rot“ the light<br />
fulfils the technical standard: „Erweiterte Spezifikation für das<br />
Feuer W, rot for the obstacle marking of wind turbines “ of<br />
the FVT issued on 26.02.2009.<br />
The lights „Feuer W rot“ and „Feuer W–ES rot“ are<br />
intended for use in rough environments. The lens is made<br />
from uv-resistant and sturdy polycarbonate, the housing is<br />
made from seawater resistant aluminum.<br />
The LED technology <strong>com</strong>bines low power consumption<br />
with high light output and long service life and guarantees<br />
long maintenance intervals.<br />
© 2011 PINTSCH ABEN B.V. • Phone +49 (0) 2064 / 602-252 • Phone +31 (0) 346 / 58 39 58 • info@pintschaben.<strong>com</strong><br />
Part-Number<br />
008 231 003 621<br />
Feuer W<br />
008 231 019 621<br />
Feuer W - ES<br />
• Effective intensity<br />
>100 cd, red<br />
• Low power consumption<br />
• Maintenance free by LED‘s<br />
• Operating life of the LED’s up to<br />
100,000 Hours<br />
• Failure output (open drain)<br />
• Light synchronization via<br />
external GPS-Module<br />
• Digital control input for manual<br />
light activation<br />
• Digital control input for reducing<br />
the rang of light 10%, 30%<br />
• Integrated flasher<br />
• Adjustable daylight switch<br />
• Programming via IR-remote<br />
control<br />
• UV and seawater resitant<br />
• Termination via open cable<br />
head<br />
• CE zertifiziert<br />
Feuer W (09/11 GB)<br />
www.pintschaben.<strong>com</strong><br />
1
LED Obstacle light<br />
<strong>LEDmin</strong> <strong>MKII</strong> „Feuer W rot“ and „Feuer W-ES rot“<br />
Technical Data<br />
Electrical Data<br />
Operating voltage: 12 / 24 V DC (reverse-polarity protected)<br />
Input voltage range: 10 - 30 V DC<br />
Power consumption (max) : 20 W<br />
Power consumption (average) : 10 W (flashing)<br />
Quiescent current : 100cd at V(+/-5°)<br />
Light color: acc. ICAO Annex 14<br />
Flash sequence: 1s light - 0,5s dark - 1s light - 1,5s dark<br />
Daylight switch 20-200 lx, in steps of 20 lx selectable<br />
30 sec delayed<br />
Environment:<br />
Operating temperature: -25° ... +60° C<br />
Storage and transport: -40° ... +80° C<br />
relative humidity: max. 98%<br />
Ingress protection: IP67 (acc. DIN EN 60529<br />
VDE 0470 Part 1)<br />
EMC: DIN EN 60945, 2003-07 &<br />
DIN EN 50293-200, 2002-02<br />
Housing: seawater resistant Aluminum (AlMg-Si),<br />
coated<br />
Dimensions:<br />
(Ø x h): 240 x 330 mm<br />
Bolt hole circle: 200 mm<br />
Fastenings holes: 4 x ∅ 14 mm or 3 x ∅ 14 mm<br />
Net weight: ca. 5 kg<br />
© 2011 PINTSCH ABEN B.V. • Phone +49 (0) 2064 / 602-252 • Phone +31 (0) 346 / 58 39 58 • info@pintschaben.<strong>com</strong><br />
Dimension<br />
Ø 10 for electrically isolated<br />
installation<br />
Alterations reserved<br />
www.pintschaben.<strong>com</strong><br />
2