Rotating beacon DLL6-300 F - Pintsch Aben
Rotating beacon DLL6-300 F - Pintsch Aben
Rotating beacon DLL6-300 F - Pintsch Aben
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Rotating</strong> <strong>beacon</strong><br />
<strong>DLL6</strong>-<strong>300</strong> F<br />
The PINTSCH BAMAG rotating <strong>beacon</strong> of the type <strong>DLL6</strong>-<strong>300</strong> is<br />
for the marking of aviation obstructions such as pylons, wind<br />
turbines or as the usage as an aerodrome <strong>beacon</strong><br />
The rotating <strong>beacon</strong> <strong>DLL6</strong>-<strong>300</strong>F is in compliance with the ICAO<br />
annex 14 Vol. I (Medium intensity light as specified in Table 6-3 or<br />
aerodrome <strong>beacon</strong> as specified in chapter 5.3.3.3)<br />
The optical system of the DLL 6-<strong>300</strong> F is build in a housing made<br />
from seawater resistant aluminum alloy with an UV-resistant and<br />
sturdy cover made from polycarbonate. Particular attention should<br />
be drawn to the optical quality of the <strong>DLL6</strong>-<strong>300</strong> F, which is a result<br />
of the newly developed lenses.<br />
The optimized control of the maintenance-free multiphase motor<br />
drive results in the noiseless and smooth operation of the lens<br />
cage.<br />
© 2011 PINTSCH ABEN B.V. • Phone +49 (0) 2064 / 602-252 • Phone +31 (0) 346 / 58 39 58 • info@pintschaben.com<br />
Part-Number<br />
008 550 0XX-657<br />
Application<br />
Usage on wind turbines or<br />
aerodromes<br />
• Maintenance-free multiphase motor<br />
drive, service life up to 70,000 hours<br />
• Centrally bearing-supported lens cage<br />
for highly precise guidance of the lens<br />
system , high regularity of peak<br />
intensities with each individual lens<br />
• spirit level for optimal alignment<br />
• Measurement and monitoring of lens<br />
cage speed via hall sensors<br />
• Automatic measurement of lamp power<br />
with variable over current limit for optimal<br />
behavior when switching on in the lowest<br />
temperatures<br />
• Protection of the motor against freezing<br />
by heating the motor coils during<br />
standstill periods<br />
• Permanent motor operation to protect<br />
the lamp changer from lens effects<br />
sustained by incoming sun light is<br />
possible<br />
• Adjustable daylight switch settings<br />
(preset to 120lux)<br />
• Adjustable monitoring of supply voltage<br />
with under voltage shut-off<br />
• Operation as main and emergency<br />
lantern and automatic changeover in<br />
case of defects in the main lantern<br />
• Parameterization via IR interface (PC,<br />
PDA, etc.)<br />
• DIP switch for setting the rotation speed<br />
• Saltwater resistant aluminum housing<br />
(AIMg-Si), painted<br />
• Cover from UV-resistant and sturdy<br />
polycarbonate, deliverable in assorted<br />
colors<br />
• Special cover version with stainless steel<br />
top cover for the operation of a lighting<br />
medium ≥100 W as daylight light signal<br />
• Digital inputs and outputs for simple<br />
integration into a control system<br />
• Waterproof plug connectors (Schaltbau<br />
M3 series, 12-pole)<br />
<strong>DLL6</strong>-<strong>300</strong>F (05/11 GB)<br />
www.pintschaben.com<br />
1
<strong>Rotating</strong> <strong>beacon</strong><br />
<strong>DLL6</strong>-<strong>300</strong> F<br />
Technical data<br />
Nominal supply voltage: 12 / 24 V DC<br />
Input voltage range: 10 … 30 V DC<br />
Power consumption of motor:
Change language