ELEKTROWERKZEUGE POWER TOOLS

DIAMOND DISCS
Description:
the diamondiferous cutting edge is applied by means of
direct sintering
Advantages
reliable in operation due to the high-quality sintering
technique
gives an accurate and neat cut
special selection of the binding components, use of the
high-quality diamond particles of certain hardness and
grain-size, their contents in the diamondiferous layer
(depending on the abrasive features and hardness of the
material to be treated and machine to be used)
optimum degree of self-sharpening
outside diameter and arbor hole size of the discs allow
them to be fi tted onto all commercially available anglegrinding
machines
Application area
meant for use with manual angle-grinders, wall chasers
and other cutting machines
Packing
double blister
DIAMOND DISCS FOR DRY CUTTING
Item
name
Art. No.
Sizes (outer
diameter, arbour
hole diameter),
mm
Cutting
width,
mm
Segment
height,
mm
Max rpm
fi gure
DD-115 93729769 115 x 22.2 1.8 mm 7 mm 13200
DD-125 93729752 125 x 22.2 1.9 mm 7 mm 12000
DD-230 93729721 230 x 22.2 2.4 mm 7 mm 6600
DIAMOND DISCS FOR DRY AND WET CUTTING
Item
name
Art. No.
Description of features
segmented type
Advantages
optimum disc cooling during its operation, contributing
to a higher cutting speed and lower eff ort applied
Application area
for cutting and treatment of natural stone, concrete
and masonry items
designed for operation without special cooling
Sizes (outer
diameter, arbour
hole diameter),
mm
Cutting
width,
mm
Segment
height,
mm
Max rpm
fi gure
DW-125 93729745 125 x 22.2 1.9 mm 7 mm 12000
DW-180 93729738 180 x 22.2 2.4 mm 7 mm 8400
DW-230 93729714 230 x 22.2 2.6 mm 7 mm 6600
Description
the continuous corrugated cutting edge
Advantages
for various applications with a wide range of
construction materials
relatively low cost with signifi cantly high cutting
performance
Application area
for cutting and treatment of various construction
materials and natural stone
can be used for dry-cutting without special water
cooling
EN
85