DIamond TII Reservoir B - Clarkson Laboratory and Supply

Reservoir Dimensions
30L Storage Reservoir
D14061, D14062, D14063, D14064: 16.3” W x 17.4” D x 31.1” H (41.4 x 44.1 x 79.0 cm)
Operating Weight: 110 lbs. (49.9 kg)
60L Storage Reservoir
D14071, D14072, D14073, D14074: 16.3” W x 17.4” D x 41.0” H (41.4 x 44.1 x 104.1 cm)
Operating Weight: 180 lbs. (81.6 kg)
Environmental Conditions
Operating: 17°C - 27°C; 20% - 80% relative humidity, non-condensing. Installation Category II
(over-voltage) in accordance with IEC 664. Pollution Degree 2 in accordance with IEC 664.
Altitude limit: 2,000 meters.
Storage: -25°C - 65°C; 10% - 85% relative humidity.
Declaration of Conformity
We hereby declare under our sole responsibility that this product conforms with the technical requirements of
the following standards:
EMC: EN 61000-3-2 Limits for Harmonic Current Emissions
EN 61000-3-3 Limits for Voltage Fluctuations and Flicker
EN 61326-1 Electrical Equipment for Measurement, Control and Laboratory Use -
EMC Requirements; Part 1: General Requirements
Safety: EN61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory use; Part I: General Requirements
per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Thermo Fisher Scientific
Electrothermal House
Unit 12A
Purdeys Industrial Estate
Purdeys Way
Rochford, Essex SS4 1ND
United Kingdom
Tel: +44(0)1702 303350
Copies of the Declaration of Conformity are available upon request.
Specifications
5