lcd colour television - Sharp Australia Support

26
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following
tip-resistant measurement for your safety.
Anchoring the TV to the wall or a pillar
View from the top
1 Fix the product with the 2 clamps
(supplied), using the screws (supplied).
Cup hook (commercially available) Tie (commercially available)
Wall
2 Fix the TV to the wall using extrastrong
ties (commercially available).
Fixing the TV to the table
1 Lay the TV down on cushioning
(such as a blanket) over a table.
2 Attach the band (supplied) to
the bottom of the stand using
the screw (supplied).
3 Transfer the product to the table
where you intend to fi x the TV.
4 Fix the TV to the table by
the band with a screw
(commercially available).
Use a screw (commercially available)
whose shape is compatible with the
band.
CAUTION
• As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the
product’s weight. The table should be set where it will not be overturned.
535
Dimensional drawings
451
797
699.2
393.8
334
Restraining band
(supplied)
5 5
Screw
(commercially
available)
Thick soft cloth
(ex. Blanket) Stand
Table
Screw for
band
(supplied)
580
92 115
262
200
43.7
Clamps
(supplied)
Screws for attaching clamps (supplied)
Table Restraining band
(supplied)
200
5 5
Unit: mm
POWER
MENU
TV
VIDEO
CH
VOL