GENERAL WELDING PRODUCTS CATALOG - Victor Technologies

Brushes & Abrasives
Wire Wheel Brushes: Crimped and Knot Style
Firepower knot-style wire wheel brushes are designed for tough jobs. each individual knot contains an equal number of
top quality high carbon tempered wires, which gives the wheel an exact balance and long-life. Firepower brushes can be
furnished in either standard twist in carbon and stainless steel. Firepower brushes are well-suited for use in the welding and
fabricating industries. they are used for surface preparation prior to welding and brazing and for removing weld scale and
spatter after the welding operation.
1423-2121 1423-2111 1423-2113
Model
Wheel
Diameter / Width
Wire
Size
Crimped Type: Carbon Steel Wire
1423-2327 4" dia. x 1/2" wide .014"
1423-2121 6" dia. x 1/2" wide .014”"
1423-2122 6" dia. x 1" wide .014"
1423-2123 8" dia. x 1.25" wide .014"
Stringer Bead Carbon and Stainless Steel Wire
1423-2111
4" dia.
.020"
Standard Twist: Carbon and Stainless Steel Wire
1423-2113
4" dia.
.020"
1423-2120
6" dia.
.020"
Arbor
Hole
5/8"-11 NC
5/8"-1/2"
5/8"-1/2"
5/8"-1/2"
5/8"-11 NC
5/8"-11 NC
5/8"-1/2"
Maximum
RPM
Arbor Reducing Adaptors:
For both cup and wheel brushes - the fixed 5/8"-11 arbor hole of each brush can be
adapted to M10 x 1.25, M10 x 1.50 and 3/8-24 NF by using arbor reducing adapter.
1423-2124 Arbor Reducing Adaptor, 5/8"-11 to M10 x 1.25
1423-2125 Arbor Reducing Adaptor, 5/8"-11 to M10 x 1.5
International Customer Care: 940-381-1212 / FAX 940-483-8178
www.thermadyne.com 91
8,000
6,000
6,000
4,500
12,500
12,500
9,000
Brushes & Abrasives