GENERAL WELDING PRODUCTS CATALOG - Victor Technologies
GENERAL WELDING PRODUCTS CATALOG - Victor Technologies
GENERAL WELDING PRODUCTS CATALOG - Victor Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Brushes & Abrasives<br />
94<br />
Brushes & Abrasives<br />
Depressed Center Grinding Wheels, Type 27<br />
Firepower depressed center wheels are fully reinforced with resin bonded aluminum<br />
oxide to ensure safety at high speed and to increase bonding and impact strength.<br />
Designed for use on air or electric powered right angle or vertical shaft grinders.<br />
Available with or without hubs.<br />
Model<br />
Without Hubs:<br />
Size<br />
1423-3151 4" x 1/8" x 5/8"<br />
1423-2186 4" x 1/8" x 5/8" (5 pc./Pk)<br />
1423-3152 4" x 1/4" x 5/8"<br />
1423-2187 4" x 1/4" x 5/8" (5 pc./Pk)<br />
1423-3186 4.5" x .045" x 7/8"<br />
1423-3199 4.5" x 1/8" x 7/8"<br />
1423-3153 4.5" x 1/4" x 7/8"<br />
1423-2188 4.5" x 1/4" x 7/8" (5 pc./Pk)<br />
1423-2189 5" x 1/4" x 7/8"<br />
1423-2191<br />
With Hubs:<br />
7" x 1/4" x 7/8"<br />
1423-3201<br />
1423-2232<br />
1423-3203<br />
1423-2190<br />
1423-2192<br />
4.5" x 1/8" x 5/8"-11 NC<br />
4.5" x 1/4" x 5/8"-11 NC<br />
7" x 1/8" x 5/8"-11 NC<br />
7" x 1/4" x 5/8"-11 NC<br />
9" x 1/4" x 5/8"-11 NC<br />
Techniques/Tips for proper Firepower Grinding Wheels:<br />
1. use this method to achieve the desired aggressiveness of<br />
stock removal and quality finish - for fast material removal<br />
increase the grinding angle between the wheel and the workpiece.<br />
For blending and finishing decrease the grinding angle<br />
and apply light pressure in a fluid motion.<br />
2. For maximum efficiency, type 27 Depressed Center Wheels<br />
should be used with a approach angle of 30°-35° to the<br />
workpiece.<br />
Max. RPM<br />
13,700<br />
13,700<br />
13,700<br />
13,700<br />
13,300<br />
13,300<br />
13,300<br />
13,300<br />
12,000<br />
8,500<br />
13,300<br />
13,300<br />
8,500<br />
8,500<br />
6,500<br />
Grade<br />
A36S<br />
A36S<br />
A24R<br />
A24R<br />
A36S<br />
A36S<br />
A36S<br />
A24R<br />
A24R<br />
A24R<br />
A24R<br />
A24R<br />
A24S<br />
A24S<br />
A24S<br />
3. Material being cut or ground should always be clamped or<br />
securely positioned, especially in cutting-off operations.<br />
4. Proper machine speed is essential for maximum efficiency.<br />
Low speed causes “Jumping” of the disc, and can cause the<br />
circumference to wear unevenly.<br />
5. Only flat cut-off wheels can be brushed, not depressed center<br />
wheels. Only 7/8" arbors can be made to 5/8"-11.<br />
U.S. Customer Care: 800-858-4232 / FAX 800-535-0557<br />
Canada Customer Care: 905-827-4515 / FAX 800-588-1714
Change language