Z-3110 - Programming Guide - Electronic Reading Systems Ltd.
Z-3110 - Programming Guide - Electronic Reading Systems Ltd.
Z-3110 - Programming Guide - Electronic Reading Systems Ltd.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PROGRAMMING GUIDE<br />
The Symbologies<br />
25<br />
1. Codabar Parameter Setting<br />
Barcode<br />
Value<br />
Start Of Configuration<br />
Barcode Label Description<br />
RC02 Codabar enable<br />
(For contact CCD scanner, middle‐range CCD scanner and<br />
handheld laser scanner)<br />
RD02 Codabar disable<br />
(Only for handheld high‐speed laser scanner)<br />
CB05 Codabar start/stop character transmission-none<br />
CB06 Codabar start/stop character transmission-A,B,C,D<br />
CB07 Codabar start/stop character transmission-<br />
DC1~DC4<br />
CB08 Codabar start/stop character transmissiona/t,b/n,c/*,d/e<br />
CB09 Codabar maximum length setting<br />
CB10 Codabar minimum length setting<br />
SET<br />
Confirm to save this setting (required for reading full<br />
ASCII table and length setting)<br />
CB11 Codabar concatenation disable<br />
CB12 Codabar concatenation enable<br />
End Of Configuration<br />
Advanced Handheld CCD/Laser Scanner
Change language