Z-3110 - Programming Guide - Electronic Reading Systems Ltd.
Z-3110 - Programming Guide - Electronic Reading Systems Ltd.
Z-3110 - Programming Guide - Electronic Reading Systems Ltd.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PROGRAMMING GUIDE<br />
33<br />
7. Code 11 Interface Setting<br />
Start Of Configuration<br />
(For handheld high‐speed laser scanner, only available for special firmware version)<br />
Barcode<br />
Value<br />
Barcode Label Description<br />
RC07 Code 11 enable<br />
RD07 Code 11 disable<br />
1101 Code 11 maximum length setting<br />
1102 Code 11 minimum length setting<br />
SET<br />
Confirm to save this setting (required for reading full<br />
ASCII table and length setting)<br />
1103 Code 11 one check digit verification<br />
1104 Code 11 two check digit verification<br />
1105 Two Check for Code 11 check digit if code length is<br />
longer than 10 characters<br />
1106 Disable verification<br />
1107 Code 11 check digit transmitted<br />
1108 Code 11 check digit not transmitted<br />
End Of Configuration<br />
Advanced Handheld CCD/Laser Scanner
Change language