Manual tehnic expresoare Jura ENA 7

More documents

Recommendations

Info

<strong>ENA</strong> 7 Dismantling and rinsing the Professional Cappuccino Frother 52 T Carefully remove the Professional Cappuccino Frother from the Connector System © by twisting slightly. T Dismantle the cappuccino frother into its individual parts. T Rinse all parts of the cappuccino frother thoroughly under running water. T Reassemble the cappuccino frother. E Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother. T Firmly attach the cappuccino frother to the Connector System © . Dismantling and rinsing the Easy Cappuccino Frother T Carefully remove the Easy Cappuccino Frother from the Connector System © by twisting slightly. T Dismantle the cappuccino frother into its individual parts. T Rinse all parts of the cappuccino frother thoroughly under running water. T Reassemble the cappuccino frother. E Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother. T Firmly attach the cappuccino frother to the Connector System © . Dismantling and rinsing the 2-stage frothing nozzle To ensure that the 2-stage frothing nozzle always works properly, you should clean it regularly if you have frothed or heated milk. J CAUTION Burns caused by hot frothing nozzle and Connector System © . T Allow the frothing nozzle to cool before cleaning it. T Carefully pull the frothing nozzle off the Connector System © . T Unscrew the frothing nozzle using the hole on the measuring spoon for preground coffee. T Rinse all three nozzle parts thoroughly under running water. T Reassemble the frothing nozzle and attach it to the Connector System © .
Cleaning the bean container Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time. Q T Press the On/Off button to switch the machine off. T Disconnect the mains plug. T Remove the bean container cover. T Remove the coffee beans with a vacuum cleaner. T Clean the bean container with a soft, dry cloth. T Fill the bean container with fresh coffee beans, then close the bean container cover. Descaling the water tank Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLARIS Blue filter cartridge, remove it. T Descale the tank with a mild conventional descaling agent in accordance with the manufacturer's instructions. T Rinse the water tank thoroughly. T If you use a CLARIS Blue filter cartridge, reinsert it. T Fill the water tank with fresh, cold water and reinsert it. <strong>ENA</strong> 7 53 de en fr it nl es pt ru
Page 1 and 2: Instructions for Use The Instructio
Page 3 and 4: 5 Maintenance 47 Rinsing the machin
Page 5 and 6: 1 2 1 = Aroma Boost button 2 < Espr
Page 7 and 8: People, including children, who U d
Page 9 and 10: T Insert the filter cartridge into
Page 11 and 12: Preparing two speciality coffees at
Page 13 and 14: E If you are using the Professional
Page 15 and 16: 3 Daily operation Switching on the
Page 17 and 18: g T Turn the Rotary Switch until EX
Page 19 and 20: Precondition: FILTER / READY is dis
Page 21: E If you are using the Professional
Page 25 and 26: 7 Troubleshooting Problem Cause/Res
Page 27 and 28: 10 Index A Addresses 59 Aroma Boost
Page 29: 11 JURA contact details / Legal inf

Manual tehnic expresoare Jura ENA 7

Create successful ePaper yourself

Delete template?

Save as template?