Material properties of the screws and fasteners: Page 14 of 23 of <strong>European</strong> <strong>Technical</strong> <strong>Approval</strong> no. <strong>ETA</strong>-<strong>06</strong>/<strong>0157</strong> Screws • IR2 4.8xL: Hardened carbon steel screw. Double-thread, with a diameter of 4,8 mm, length L and with a 8 mm hexagonal head. Durocoat corrosion protection. • IR2S 4,8xL: Austenitic stainless steel A4 screw. Diameter of 4,8 mm, length L and with a 8 mm hexagon head. • IFP2 6,7xL: Hardened carbon steel screw. Double-thread, with a diameter of 6,7 mm, length L and with a 11 mm diameter flat head. Durocoat corrosion protection. • IWT 5xL: Hardened carbon steel screw. Diameter of 5 mm, length L and with a 9.5 mm diameter flat head. Duracoat corrosion protection. • IG 6xL: Hardened carbon steel screw. Diameter of 6 mm, length L and with a 8 mm diameter flat head. Duracoat corrosion protection. • IGR-S 8,0xL: Austenitic stainless steel A2 screw. Diameter of 8,0 mm, length L and with a 12 mm countersunk head. • TI 6,3xL: Hardened carbon steel screw. Diameter of 6,3 mm, length L and with a 8 mm hexagon head. Duracoat corrosion protection. • DT 6xL: Hardened carbon steel screw. Diameter of 6,3 mm, length L • IG 6xL: Hardened carbon steel screw. Diameter of 6 mm, length L and with a 8 mm diameter flat head. Duracoat corrosion protection. • EVF 2C 4.8xL: hardened carbon steel screw. Diameter of 4,8 mm, length L and with a 12 mm circular head. Supracoat corrosion protection. • EVDF 2C 4.8xL: hardened carbon steel screws with double-thread under head, with a diameter of 4,8 mm, length L and with a 12 mm circular head. Supracoat corrosion protection. • EVBDF 2C: hardened carbon steel screws with double-thread under head, with a diameter of 4,8 mm, length L and with a 12 mm circular head. Supracoat corrosion protection. • EHBDF 2C 4.8xL: hardened carbon steel screw with double-thread under head, with a diameter of 4,8 mm, length L and with a 8 mm hexagonal head. Supracoat corrosion protection. • VMS 2C 4.8xL: hardened carbon steel screw. Diameter of 4,8 mm, length L and with a 8.5 mm circular head. Supracoat corrosion protection. • EGB 2C 4.8xL: hardened carbon steel screw. Diameter of 4,8 mm, length L and with a 12 mm circular head. Supracoat corrosion protection. • ISODRILL TT: stainless steel screw. Diameter of 4,8 mm, length L and with a 8,5 mm circular head. A4 (1.4404) Stainless steel. • ISODRILL TH DF: Stainless steel screw with double-thread under head, with a diameter of 4,8 mm, length L and with a 8 mm hexagonal head. A4 (1.4304) stainless steel. • FASTOVIS 3036 TF 2C : hardened carbon steel screw. Diameter of 6,5 mm, length L and with a 11 mm cuntersunk head. Supracoat corrosion protection. • FASTOVIS 3036 TF DF 2C : hardened carbon steel screws with double-thread under head, with a diameter of 6,5 mm, length L and with a 11 mm countersunk head. Supracoat corrosion protection. • PER and RER : Aluminium rivet. Diameter of 4,8 mm, length L and with a 10 mm circular head. • TPR 6,3xL : Aluminium rivet. Diameter of 6,3 mm, length L. • BETOFAST TH 3C: hardened carbon steel screw, with a diameter of 6,6 mm, length L and with a 8 mm hexagonal head. Supracoat corrosion protection. • BETOFAST TH DF 3C : hardened carbon steel screw with double-thread under head, with a diameter of 6,6 mm, length L and with a 8 mm hexagonal head. Supracoat corrosion protection. • BETOFAST TT 2C: hardened carbon steel screw. Diameter of 4,8 mm, length L and with a 8,5 mm circular head. Supracoat corrosion protection • NAILFIX CH: carbon steel nail diameter 4,8 mm, length L with a 10 circular head. Hot dip galvanized corrosion protection. • MULTIFAST TB INOX A2 : Stainless steel screw. Diameter of 6 mm, length L and with a 12 mm circular head. A2 (1.4301) stainless steel. • MULTIFAST TF : Stainless steel screw. Diameter of 6 mm, length L and with a 11 mm countersunk head. A2 (1.4301) stainless steel.
Page 15 of 23 of <strong>European</strong> <strong>Technical</strong> <strong>Approval</strong> no. <strong>ETA</strong>-<strong>06</strong>/<strong>0157</strong> Washers • 82x40 R DF: reinforced steel plate 82x40 mm, thickness 10/10e mm with punched inside cone. Hole Ø 5,1 mm. Aluzinc AZ 150 protection • 82x40 R: reinforced steel plate 82x40 mm, thickness 10/10e with punched inside cone. Hole Ø 6 mm. Aluzinc AZ 150 protection • 82x40 R SC: reinforced steel plate 82x40 mm, thickness 10/10e mm. Hole Ø 6,4 mm. Aluzinc AZ 150 protection • IR 82x40, IRD 82x40, IRP 82x40, IF/IG C 82x40, IG8 C 82x40, IRC/W 82x40: steel plates with aluzinc protection, dimension 82x40 mm, thickness 1.00 mm • Etancoplast T 80x40: Ø 73x40 plastic plate with shaft Note In addition to the list of fasteners, other fasteners may also be used unless they are covered by a valid <strong>ETA</strong> and with rectangular plate with dimensions of 82X40 (as example, the fasteners of the <strong>ETA</strong> 08/0285 from AFAST BV – Guardian Fastening System- with plate size 82X40)