Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HIn3637 <strong>Manual</strong> Page — 15<br />
time. The HIn3637 should be charged only with an<br />
approved battery charger.<br />
Battery Replacement<br />
A NiCd battery powers the HIn3637 Magnetic Field<br />
Meter (See Table 5n1). In the event of battery failure, a<br />
new battery can be obtained from Holaday Industries.<br />
NOTE:<br />
A #0 Phillips screwdriver works well for the<br />
following procedure.<br />
To replace the battery, remove the eight screws located<br />
around the lip of the meter's front panel, pull the panel<br />
away from the chassis and unplug the battery connector.<br />
Remove the battery retainer and the old battery. Install<br />
the new battery and reverse the above steps to<br />
reassemble the meter.<br />
CAUTION<br />
Never short the terminals of a NiCd battery (even a<br />
discharged battery). The resulting current may be excessive<br />
and cause the lead wires to become extremely hot, which<br />
can result in severe burns and/or fire.
Change language