IT13 Operation - Euroheat

More documents

Recommendations

Info

Air Volume Control The air volume should be set to maximum, 9 O’clock, only when lighting and the flue is cold. Settings giving normal operating temperatures will usually be between 12 O’clock and 3 O’clock, with slow burning being achieved when the control is set between 3 O’clock and 6 O’clock. Do not expect the insert’s performance to match any setting repeatedly because it will be affected by so many other factors such as fuel quality and weather conditions. Lighting and when the Flue is Cold Only Normal Operating Temperatures Slow Burning This Control Knob May be Hot. Always Use the Operating Tool to Make Air Volume Adjustments. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. June. 2010 10 Instructions Part Number IN1180 Ed D1
Rotation Stop Button To enable the Air Volume Control knob to be rotated to the lighting position press rotation stop button inwards while rotating the Air Volume Knob. This auto stop system prevents the user leaving the control in an over air condition which severally reduces the appliances efficiency. This stop also prevents the remote control when in automatic mode increasing the combustion air beyond ideal operational conditions. Minimum Maximum Minimum Air Setting This facility of having an adjustable minimum air setting provides a positive repeatable Minimum air setting that will give the lowest burning rate at which the stove will continue burning when the firing rate control is turned to its minimum position. It will also give a small Maximum feed to the air wash when the stove is burning coal, not enough to risk damage to the grate, but enough to help keep the glass clean. It is also an important safety feature. If the stove has been burning with a constant air supply it has been generating and burning the volatile gasses from the fuel. If the air supply is abruptly and completely removed the fire will extinguish but the release of gasses will continue for some time. These gases will be above their ignition temperature and be potentially explosive if they come into contact with air. The constant air bleed that the small flap allows will keep some of these gasses burning and prevent sudden ignition whilst the generation of gasses reduces. Important If the appliance is to used with wood in a smoke exempt area the minimum air control flap must be set at its maximum position. This flap should only be adjusted by approved engineers. See Installation instructions for more details. Smoke Control Exempt This lever should be set to maximum (fully open) at all times unless advised otherwise by your heating engineer or the <strong>Euroheat</strong> Technical Department. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. June. 2010 11 Instructions Part Number IN1180 Ed.D1
Page 1 and 2: This Manual Must Always Be Availabl
Page 3 and 4: Table of Contents The Model Explain
Page 5 and 6: Operating Items Supplied with the S
Page 7 and 8: A insert is very much safer than an
Page 9: The Plexus Air Control Your insert
Page 13 and 14: Ash Pan Removal Your ash pit door w
Page 15 and 16: Getting Started with Wood Ensure th
Page 17 and 18: Reduce the air volume control when
Page 19 and 20: Advanced Driving With Wood Once the
Page 21 and 22: Slow, Overnight Burning Wood releas
Page 23 and 24: Wait until the kindling fire core h
Page 25 and 26: The coal should be at least glowing
Page 27 and 28: Advanced Insert Driving With Coal (
Page 29 and 30: Removing The Chamber Baffle Periodi
Page 31 and 32: Technical Data, Intermittent Operat

IT13 Operation - Euroheat

Create successful ePaper yourself

Delete template?

Save as template?