IT13 Operation - Euroheat

Rotation Stop Button
To enable the Air Volume Control knob to be rotated to the lighting position press rotation stop button inwards
while rotating the Air Volume Knob.
This auto stop system prevents the user leaving the control in an over air condition which severally reduces
the appliances efficiency. This stop also prevents the remote control when in automatic mode increasing the
combustion air beyond ideal operational conditions.
Minimum
Maximum
Minimum Air Setting
This facility of having an adjustable minimum
air setting provides a positive repeatable Minimum
air setting that will give the lowest burning
rate at which the stove will continue burning
when the firing rate control is turned to its
minimum position. It will also give a small Maximum
feed to the air wash when the stove is
burning coal, not enough to risk damage to
the grate, but enough to help keep the glass
clean. It is also an important safety feature. If
the stove has been burning with a constant air
supply it has been generating and burning the
volatile gasses from the fuel. If the air supply
is abruptly and completely removed the fire will extinguish but the release of gasses will continue for some time.
These gases will be above their ignition temperature and be potentially explosive if they come into contact with
air. The constant air bleed that the small flap allows will keep some of these gasses burning and prevent sudden
ignition whilst the generation of gasses reduces.
Important
If the appliance is to used with wood in a smoke exempt area the minimum air control
flap must be set at its maximum position. This flap should only be adjusted by approved
engineers. See Installation instructions for more details.
Smoke
Control
Exempt
This lever should be set to maximum (fully open) at all times unless advised otherwise by
your heating engineer or the Euroheat Technical Department.
© EUROHEAT DISTRIBUTORS (H.B.S) LTD. June. 2010 11
Instructions Part Number IN1180 Ed.D1