Baby Collection - Farbenmix

More documents

Recommendations

Info

Baby Collection Comfy Pants Trousers Fabric (140 cm/54“) 55 cm Waistband 58 cm Hip circumference 58 cm Outseam (+waistband) 27.5 cm Fabric (140 cm/54 in.) 40 cm Elastic 37 cm Waist circumference 48 cm Hip circumference 48 cm Outseam 28 cm Fabric (140 cm/54 in.) 40 cm Elastic for waistband 37 cm Cutting the Layout 5/8 yrd. 22 7/8 in. 23 in. 10 7/8 in. 15 7/8 in. 14 ¾ in. 19 in. 19 in. 11 1/8 in. ½ yrd. 3/8 yrd. 60 cm 65 cm 65 cm 35.5 cm 50 cm 44 cm 55 cm 55 cm 36 cm 50 cm 44 cm ¾ yrd. 25 5/8 in. 25 5/8 in. 14 in. 19 ¾ in. 17 3/8 in. 21 ¾ in. 21 ¾ in. 14 ¼ in. 5/8 yrd. ½ yrd. 65 cm 72 cm 72 cm 43.5 cm 55 cm 51 cm 62 cm 62 cm 44 cm 55 cm 51 cm Cut the pieces according to the piece list and add an additional seam allowance. The pieces drafted on the sheet do not include a seam allowance. Cut the pieces with respect to the grain. Transfer any marks from the pattern sheet to the cut pieces. Piece List Pinafore Dress/Tunic 1 - Front/back piece bodice cut 2 2 - Front/back piece lower cut 2 on fold 3 - Straps cut 2 Fabric requirements/Size Bias tape (extra wide, double fold) 50/56 2 x 68 cm Up to 3 months 2x. 27 in. Shirt 4 - Front piece cut 1 on fold 5 - Back piece cut 1 on fold 6 - Arm cut 2 on fold Fabric requirements/Size 50/56 Neckline strip front 6 x 26 cm Neckline strip back 6 x 21.2 cm Jacket 7 - Front piece cut 2 on fold 8 - Back piece cut 1 on fold 9 - Arm cut 2 on fold 10 - Pocket cut 2 11 – Hood cut 2 Hoodie 62/68 2 x 70 cm Up to 3 months 62/68 2 ½ x 10 ¼ in 6 x 28 cm 2 ½ x 8 3/8 in 6 x 24 cm Up to 6 months 2 x 27 ½ in. 74/80 2 x 72 cm Up to 6 months 74/80 2 ½ x 11 in. 6 x 32 cm 2 ½ x 9 ½ in. 6 x 27.6 cm 12 to 18 months 2 x 28 ½ in. 12 to 18 months 2 ½ x 12 ¾ in. 2 ½ x 10 7/8 in. ¾ yrd. 28 3/8 in. 28 3/8 in. 17 ¼ in. 21 ¾ in. 20 1/8 in. 24 ½ in. 24 ½ in. 17 3/8 in. 5/8 yrd. 5/8 yrd.
Baby Collection 12 - Front piece cut 1 on fold 13 - Back piece cut 1 on fold 14 - Arm cut 2 on fold 15 - Pocket cut 2 on fold 11 – Hood (optional) cut 2 Fabric requirements/Size 50/56 Neckband 4 x 31 cm Up to 3 months 2 x 12 ¼ in. Trousers 16 - Pant leg front cut 2 17 - Pant leg back cut 2 18 - Cuff piece cut 2 19 - Knee patch oval cut 2 (20 - Knee patch heart cut 2) Cuddly Trousers 21 - Trouser piece cut 2 Dress Tunic 62/68 4 x 32 cm Up to 6 months 2 x 12 ¾ in. 74/80 4 x 33 cm 12 to 18 months 2 x 13 in. This dress is quickly made, can be embellished in so many ways and be worn for several seasons over leggings or trousers. The tied straps look precious on an infant, but the buttoned straps may bet be better choice for active crawlers. Version with shoulder ties Cutting the layout Cut the required pieces. You may leave off the additional seam allowance at the armscythe of the upper and lower pieces. Cut bias tape for the tied strap (for best flexibility, cut on a true 45° bias to the grain). You may also use store-bought, preprepared extra-wide double-fold bias tape. Sewing the dress 1. Finish all piece edges. 2. Gather the upper edge of the front and back lower dress pieces. 3. Press the upper seam allowance of the bodice inside, fold the bodice piece to the right fabric side and pin to the lower dress piece. Topstitch. Fold the bodice piece to the right side of the dress piece and topstitch. 4. Stitch the front and back dress pieces along the side seams. 5. Stitch the bias tape along the armscyth. Be certain to leave enough bias tape over the armscyth for tying. Unfold the bias tape and place the edge to the edge of the armscyth, right sides together, and stitch to the dress along the fold. While stitching along the curve, gently pull the bias tape for a smooth turn. Fold the bias tape over the stitching line and over the edge of the dress. Stitch the bias tape in place from the right side. Tuck the very ends of the bias tape toward the wrong side (or tie knots into the tie ends at the very end) Consider using a zig zag stitch or blanket stitch to facilitate catching the other half of the bias tape on the garment wrong side. Stitch the two halves of the bias tape tie together, continue stitching over the armscyth and up the other half of the bias tape tie. 6. Hem the dress. Version with straps Cutting the layout Cut the required pieces. You may leave off the additional seam allowance at the armscythe of the upper and lower pieces. Cut pieces of bias tape approximately 12 to 14 cm (4 ½ to 5 ½ inches), depending on the dress size (for best flexibility, cut on a true 45° bias to the grain). You may also use store-bought, pre-prepared extra-wide double-fold bias tape. Sewing the dress 1. Finish all piece edges. 2. Press the seam allowances of the shoulder strap pieces toward the wrong side. Fold the shoulder strap pieces in half and press. Edgestitch completely around the shoulder straps. 3. Stitch the side seams of the lower dress pieces right sides together. 4. Stitch the bias tape along the armscyth of the lower dress. In this version of the dress, the bais tape is added to only under the arm on the lower dress piece. Unfold the bias tape and place the edge to the edge of the armscyth, right sides together, and stitch to the dress along the fold. While stitching along the curve, gently pull the bias tape for a smooth turn. Fold the bias tape over the stitching line and over the edge of the dress. Stitch the bias tape in place from the right side. Consider using a zig zag stitch or blanket stitch to facilitate catching the other half of the bias tape on the garment wrong side.
Page 1: Baby Collection Zwergenverpackung B
Page 5 and 6: Baby Collection 15. Topstitch the l
Page 7: Baby Collection Snuggly reversible

Baby Collection - Farbenmix

Create successful ePaper yourself

Delete template?

Save as template?