Operating and installation instructions Ceramic hobs with ... - Miele

More documents

Recommendations

Info

Induction The induction principle An induction coil is located under each cooking zone. When a cooking zone is switched on, this coil creates a magnetic field which impacts directly on the base of the pan and heats it up. The cooking zone itself is heated up indirectly by the heat given off by the pan. An induction cooking zone only works when a ferromagnetic pan is placed on it (see "Pans"). Induction automatically recognises the size of the pan, i.e. heat is only generated in the area covered by the base of the pan. The cooking zone will not work: – if it is switched on without a pan in place, or if the pan is unsuitable (non-magnetic base). – if the diameter of the base of the pan is too small. – if the pan is taken off the cooking zone when it is switched on. If this happens, ß will flash in the relevant cooking zone display alternating with 0 or the power setting selected . 16 If a suitable pan is placed on the cooking zone within 3 minutes, the ß will go out and you can continue as normal. If no pan or an unsuitable pan is placed on the cooking zone, the cooking zone and the hob will switch off automatically after 3 minutes. Take particular care never to place cutlery or other metal objects on the hob. When the appliance is switched on either deliberately or by mistake, or when there is residual heat present, there is the risk of metal items heating up with the danger of burning. Switch the cooking zones off after use.
Noises When using an induction cooking zone, the following noises can occur in the pan, depending on what it is made of and how it has been constructed. – On the higher power settings, it might buzz. This will decrease or cease altogether when the power setting is reduced. – If the pan base is made of layers of different materials (e.g. in a sandwiched base), it might emit a cracking sound. – Whistling might occur if linked zones (see "Booster function") are being used at the same time, and the pans also have bases made of layers of different materials. – You might hear a clicking sound from the electronic switches, especially on lower settings. Induction The appliance has a cooling fan to help extend the life of the electronics. When the hob is being used intensively, this will come on and you will hear a whirring sound. The fan may continue to run after the appliance has been switched off. 17
Page 1 and 2: Operating and installation instruct
Page 3 and 4: Contents Problem solving guide ....
Page 5 and 6: KM 5950 abcd Cooking zones e Contro
Page 7 and 8: Cooking zones Cooking zone KM 5940
Page 9 and 10: Safety with children Use the safet
Page 11 and 12: Faulty components must only be repl
Page 13 and 14: Do not allow either solid or liquid
Page 15: Please stick the extra data plate f
Page 19 and 20: Sensor switches This hob is equippe
Page 21 and 22: Settings Cooking process Settings*
Page 23 and 24: Booster function Each cooking zone
Page 25 and 26: Safety lock Keep children away from
Page 27 and 28: Overheating protection All the indu
Page 29 and 30: Ceramic surface Wipe all coarse soi
Page 31 and 32: Installation work and repairs to el
Page 33 and 34: Miele appliances are designed to gi
Page 35 and 36: Safety distance above the appliance
Page 37 and 38: Safety distances underneath the hob
Page 39 and 40: KM 5940 0 574 50 a 490 422 a Front
Page 41 and 42: Preparing the worktop Make the wor
Page 43 and 44: All electrical work should be carri
Page 45 and 46: Wiring diagram Electrical connectio
Page 48: Alteration rights reserved / 0510 M

Operating and installation instructions Ceramic hobs with ... - Miele

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?