Chemical Engineering - The Petroleum Institute

More documents

Recommendations

Info

I. Vinogradov, L. Khezzar and D. A. Siginer, “Heat transfer of dilatant fluids in square and rectangular cavities”, in 2 nd International Conference on Energy Conversion and Conservation, Hammamet, Tunisia, 2010. F. Belaid, M. E. Benhamza and L. Khezzar, “Natural convection heat transfer enhancement in rectangular enclosures using nanofluids: Effect of inclination and aspect ratio”, in 2 nd International Conference on Energy Conversion and Conservation, Hamammet, Tunisia, 2010. A. Molki, “Integration of virtual instrumentation in a modern mechanical engineering curriculum”, in International Technology, Education and Development Conference, Valencia, Spain, 2010, pp. 002230- 002237. N. Kharoua, A. Molki, A. Seibi and L. Khezzar, “Experimental investigation and computational fluid dynamics of wind flow around a hemispherical dome”, in 2 nd International Conference on Energy Conversion and Conservation, Hammamet, Tunisia, 2010. A. Molki, “A comparative review of exception handling in Ada 95, C++, and Java”, in International Conference on Education and New Learning Technologies , Barcelona, Spain, 2010, pp. 002937-002941. M. D. Rao, “Vibration and noise issues in the oil and gas industries”, in Rotate Conference, Abu Dhabi, UAE, 2010. A. Willemsen and M. D. Rao, “Characterization of sound quality of impulsive sounds using loudness based metric”, in 20 th International Congress on Acoustics, Sydney, Australia, 2010. A. Willemsen and M. D. Rao, “Prediction of subjective annoyance for transient sounds using a novel loudness-based impulsiveness measure”, in Noise-Conference 2010, Baltimore, USA, 2010. S. Popli, P. Rodgers, V. Eveloy, S. Al Hashimi, R. Radermacher and Y. Hwang, “Opportunities for energy efficiency enhancements in the oil and gas industry using waste heat powered absorption chillers”, in ADIPEC, Abu Dhabi, UAE, 2010. P. Rodgers, S. Bojanampati, V. Eveloy, A. Goharzadeh and A. Molki, “Teaching of multimode heat transfer through laboratory experiments”, in ASME International Mechanical Engineering Congress & Exposition, Vancouver, Canada , 2010. C. Rodrigues, J. Jeyaseelan and S Unnithan, “A carbon footprint management program for resource consumption cost reduction”, in Middle East Health, Safety, Security, and Environment Conference and Exhibition, Manama, Bahrain, 2010. R. Zhang, L. Olson, A. Seibi, A. Helal, A. Khalil and M. Rahim, “Improved impact-echo approach for nondestructive testing and evaluation”, in Advances in Sensors, Signals and Materials, 3 rd International Conference on Materials Science, Portual, USA, 2010, pp. 39 – 44. I. Kalfat Ismail, A. C. Seibi and M. Neifar, “Stress analysis of an elliptic composite pipe under diametral loading”, in International Conference on Applied Mechanics and Manufacturing , Muscat, Oman, 2010. F. Boukadi, A. C. Seibi, A. Ghalambor and F. O. Iluore, “A new mathematical model for estimating perforation penetration length”, in SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 2010. J. Sheikh-Ahmad, N. Urban and H. Cheraghi, “Machining damage in edge trimming of Carbon Fiber Reinforced Polymer (CFRP) composites”, in International Conference on Applied Mechanics, Materials and Manufacturing, Muscat, Oman, 2010. O. V. Shiryayev and J. C. Slater, “Sensitivity studies of nonlinear vibration features for detection of cracks in turbomachinery components”, in 51 st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Orlando, Florida, USA, 2010. _____________________________________________________________________________________ - 26 -
J. Snyder, C. Barnes, J. Rinderle, O. Shiryayev and J. Slater, “Experimental near-space free fall testing systems”, in 51 st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Orlando, Florida, USA, 2010. F. M. Letelier, D. A. Siginer, J. S. Stockle and A. Huilcan, “Laminar flow in tubes of circular cross-section with arbitrary axial variation”, in American Society of Mechanical Engineers International Mechanical Engineering Conference and Exposition, Vancouver, British Columbia, Canada, 2010. F. M. Letelier, D. A. Siginer, J. S. Stockle and C. Herrera, “Resonance modeling and control in structures by means of magnetorheological dampers”, in American Society of Mechanical Engineers International Mechanical Engineering Conference and Exposition, Vancouver, British Columbia, Canada, 2010. J. S. Stockle, F. M. Letelier, D. A. Siginer and J. Maria, “Establishing plastic flow in circular pipes under the effect of a magnetic field”, in American Society of Mechanical Engineers International Mechanical Engineering Conference and Exposition, Vancouver, British Columbia, Canada, 2010. D. A. Siginer, I. Vinogradov and L. Khezzar, “Inelastic and Newtonian flow instabilities and related heat transfer in inclined boxes”, in American Society of Mechanical Engineers International Mechanical Engineering Conference and Exposition, Vancouver, British Columbia, Canada, 2010. B. Khusid, Y. Shen, E. Elele, P. Palle and D. A. Siginer, “Electro-hydrodynamic drop-on-demand printing of personalized medicines on porous film”, in American Society of Mechanical Engineers International Mechanical Engineering Conference and Exposition, Vancouver, British Columbia, Canada, 2010. D. A. Siginer and F. T. Akyildiz, “Drainage of thin viscoelastic films”, in American Society of Mechanical Engineers International Mechanical Engineering Conference and Exposition, Vancouver, British Columbia, Canada, 2010. D. A. Siginer and F. M. Letelier, “Heat transfer asymptote in laminar tube flows of non-linear viscoelastic fluids”, in International Heat Transfer Conference , Washington, D. C., USA, 2010. D. A. Siginer and F. T. Akyildiz, “Heat transfer enhancement in corrugated pipes”, in International Heat Transfer Conference , Washington, D. C., USA, 2010. D. A. Siginer and L. Khezzar, “Flow instabilities and heat transfer in buoyancy driven flows of inelastic non- Newtonian fluids in inclined rectangular cavities”, in ASME 3 rd Joint US-European Fluids Engineering Summer Meeting , Montreal, Canada, 2010. D. A. Siginer and F. T. Akyildiz, “Heat transfer enhancement with dissipation in transversally corrugated tubes”, in ASME 3 rd Joint US-European Fluids Engineering Conference, Montreal, Quebec, Canada, 2010. D. A. Siginer and F. T. Akyildiz, “Flow and heat transfer in wavy tubes”, in 5 th International Conference on Thermal Engineering and Applications, Marrakech, Morocco, 2010. R. Tikani, N. Vahdati and S. Ziaie-Rad, “Effective reduction of peak frequency in hydraulic engine mounts”, in ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Philadelphia, USA, 2010. R. Tikani, N. Vahdati, S. Ziaie-Rad, S. Heidari and M. Esfahanian, “A novel double‐notch passive hydraulic engine mount design”, in 20 th International Congress on Acoustics, Sydney, Australia, 2010. N. Vahdati and S. Heidari, “Adaptive electromechanical tuned vibration absorbers and their application in semi‐active fluid mounts”, in 20 th International Congress on Acoustics, Sydney, Australia, 2010. R. Tikani, N. Vahdati, S. Ziaie-Rad and M. Esfahanian, “New approach for double-notch frequency hydraulic mounts”, in Internoise, Lisboa, Portugal, 2010. Y. F. Yap and J. C. Chai, “Numerical methods for problems with moving interfaces and irregular geometries”, in 6 _____________________________________________________________________________________ - 27 - th International Conference on Diffusion in Solids and Liquids, Paris, France, 2010.
Page 1: The Petroleum Institute Abu Dhabi S
Page 4 and 5: Editor: Caroline Brandt Academic Ad
Page 6 and 7: Humanities and Social Sciences Depa
Page 8 and 9: COLLEGE OF ENGINEERING Books Chemic
Page 10 and 11: Book Chapters Chemical Engineering
Page 12 and 13: Theses and dissertations Chemical E
Page 14 and 15: properties in ChE university educat
Page 16 and 17: K. M. Sabil, V. R. Román, G. J. Wi
Page 18 and 19: O. Al-Ameri, M. Serhan, L. Lamont a
Page 20 and 21: A. Molki, “Simple demonstration o
Page 22 and 23: G. R. Dix, S. Sharma, I. S. Al-Aasm
Page 24 and 25: A. S. Kurup, W. G. Chapman, F. M. V
Page 26 and 27: S. M. Muyeen, “Grid interfacing o
Page 30 and 31: Y. F. Yap and J. C. Chai, “Numeri
Page 32 and 33: Petroleum Geosciences Department E.
Page 34 and 35: Petroleum Geosciences Department J.
Page 36 and 37: P. Robertson and R. Nunn, (Eds.), A
Page 38 and 39: R. Nunn, “Comparing teachers‟ m
Page 40 and 41: M. Haroun, S. Shin, S. Pamukcu, G.
Page 42 and 43: AUP DEPARTMENT Book chapters V. Ste
Page 45: Electronic Availability This docume

Chemical Engineering - The Petroleum Institute

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?