ARRI Camera General Catalogue - Musitelli

WIRELESS REMOTE SYSTEM
Complete Lens and Camera Control - Wireless or Cabled
Ident-No. Description
K2.65012.0 UMC-3 to S4i Cable (0,7m/2,1ft) KC-96-S
Connects AUX socket on UMC-3 to Cooke S4i lenses. Functions: transmits lens data to UMC-3.
K2.65057.0 UMC-3 to Fujinon ENG lens cable KC-110-S
Y-Cable connects to ports on handgrip motor of Fujinon ENG lens. Allows for remote control of focus, iris and
zoom using ARRI WRS control units, as well as camera RUN/STOP. Cable-to-lens connectors via special rightangle
plugs to clear lightweight support rods.
K2.65074.0 UMC-3 to Canon ENG lens cable KC-118-S
Connects to port on handgrip motor of Canon ENG lens. Allows for remote control of focus, iris and zoom using
ARRI WRS control units, as well as camera RUN/STOP. Cable-to-lens connectors via special right-angle plugs to
clear lightweight support rods.
K2.65058.0 External Battery Cable for UMC-3 and Video Cameras KC-111-S
For drive of up to three CLM-2 lens motors. Video camera RUN/STOP is supported. Separate power supply for
video camera required.
K2.65016.0 UMC-3 Update Kabel
MOUNTING HARDWARE for UMC-3 and OTHER ACCESSORIES
K2.52080.0 Quick change adapter 3/8" Set for UMC-3 and other accessories
26mm dovetail insert (K2.52082.0) and shoe (K2.52083.0) set for attachment of UMC-3 to camera. Both sides
attach to 3/8" UNC thread mounting points having standard ARRI Ø15,5mm counterbore.
K2.52082.0 Dovetail Insert, 3/8" Thread
All purpose 26mm dovetail insert. Can be attached to 3/8" thread mounting points having standard ARRI
Ø15,5mm counterbore. For use with 26mm dovetail shoes.
K2.52083.0 Dovetail Shoe, 3/8" thread
All purpose 26mm dovetail shoe. Can be attached to 3/8" thread mounting points having standard ARRI
Ø15,5mm counterbore. For use with 26mm dovetail inserts.
K2.52150.0 Dovetail Insert Rod Bracket (WHA-2 Rod Bracket)
Bracket with 26mm dovetail (insert side) interface on short articulated arm, attaches to 19mm or 15mm support
rod. For use with 26mm shoe-mounted accessories such as UMC-3 with Quick-Change Adapter K2.52080.0,
Dovetail shoe K2.52083.0, or Wired Handgrip Attachments WHA-2 / WHA-3.
K2.52153.0 Dovetail Insert Bracket, ARRIHEAD Rosette (WHA-2 Rosette Bracket)
Bracket with 26mm dovetail (insert side) interface on 15mm rod, attaches to ARRIHEAD rosette, can be pivoted
on rosette or slid along rod. For use with 26mm shoe-mounted accessories such as UMC-3 with Quick-Change
Adapter K2.52080.0, Dovetail shoe K2.52083.0, or Wired Handgrip Attachments WHA-2 / WHA-3.
K2.54148.0 Dovetail Insert Rod Clamp (19mm)
26mm dovetail insert with integrated clamp for 19mm support rod.
K4.52563.0 Dovetail Insert Rod Clamp (15mm)
26mm dovetail insert with integrated clamp for 15mm support rod.
COMPONENTS - WIRELESS MAIN UNIT FOR HAND CONTROLS
K2.52240.0 Wireless Main Unit WMU-3
WMU-3 is the central unit for attachment of hand controllers in wireless configurations and incorporates the
wireless transmitter. WMU-3 is required for all wireless configurations.
K2.52241.0 Wireless Expansion Bracket WEB-3
WEB-3 attaches to WMU-3 and adds an additional quick-release port for configurations involving multiple
combined hand units or combinations with the Lens Data Display.
K2.52270.0 WMU-3 Update Cable (2m/7ft) KC87-S
Connects WMU-3 to PC - for update purposes only
K2.52263.0 Cable WC-A3
for cabling Wireless Main Unit WMU-3 to 435 Radio Modem URM-3 or Universal Motor Controller UMC-3 in
place of antennas. Length: 15m / 50 ft.
K2.52096.0 WC-A2 Extension Cable
for remote placement of antenna from Wireless Main Unit WMU-3, 435 Radio Modem URM-3 or Universal
Motor Controller UMC-3. Length: 3m / 10 ft.
102
* only as long as stock is available