ARRI Camera General Catalogue - Musitelli

ARRIFLEX 416
Electronic Accessories
Ident-No. Description
CAMERA REMOTE CONTROLS
K2.47197.0 Remote Control Unit 1 (RCU-1)
A wired remote control with LCD display. Connects to CCU connector (435, 535B, 16SR 3) or REMOTE connector
(235, 416). Allows manual and automatic control of frame rate, shutter angle and ramps. Control of shutter
angle only for cameras with electronically adjustable mirror shutters. Includes RCU Cable Short (1.5m/5feet)
KC-39 (K4.47329.0).
K4.47329.0 RCU Cable Short (1.5m/5feet) KC-39 spare
Connects the Remote Control Unit (RCU-1) to the CCU connector of all ARRIFLEX 435 models as long as FEM-1
(discontinued) or FEM-2 (K2.52226.0) are present, 535B and all 16SR 3 models, or to the REMOTE connector of
the ARRIFLEX 235 or 416.
K2.47350.0 RCU Cable Long (20m/60feet) KC-41
Connects the Remote Control Unit (RCU-1) to the CCU connector of all ARRIFLEX 435 models as long as FEM-1
(discontinued) or FEM-2 (K2.52226.0) are present, 535B and all 16SR 3 models, or to the REMOTE connector of
the ARRIFLEX 235 or 416.
K2.55013.0 External Display (EXD-1)
An external display that duplicates the information of the camera mounted display; connects to CCU or REMOTE
socket. Includes MODE, SEL, SET, RUN and PHASE buttons. EXD-1 Cable Short (K4.65207.0) is included with
display. For flexible mounting of external display to any 3/8"-16 UNC threaded hole, Universal Mounting Arm
UMA-120 (K2.65020.0) is recommended.
K4.65207.0 EXD-1 Cable Short (0.8m/2'7") KC-100-S spare
Connects the External Display EXD-1 to the CCU connector of all ARRIFLEX 435 models as long as FEM-1
(discontinued) or FEM-2 (K2.52226.0) are present, 535B and all 16SR 3 models, or to the REMOTE connector of
the ARRIFLEX 235 or 416.
K2.65067.0 EXD-1 Cable Long (20m/66feet) KC-122-S
Connects the External Display EXD-1 to the CCU connector of all ARRIFLEX 435 models as long as FEM-1
(discontinued) or FEM-2 (K2.52226.0) are present, 535B and all 16SR 3 models, or to the REMOTE connector of
the ARRIFLEX 235 or 416.
K2.65020.0 Universal Mounting Arm UMA-120
Articulated accessory holder arm, 120mm / 4.7" long, with two swivel ball joints and one elbow joint. Has
combination fastener system for use with plain 3/8"-16 UNC threaded holes or ARRI 3/8-16" mounting points
with locating pins.
K2.46942.0 Remote Switch RS-4: compatible with ARRICAM, 435, 535B, 416 and 16SR 3
Remote camera run/stop. Unit has universal clip for attachment to fluid head pan bar or other round object.
Permanently attached short cable connects to camera's RS socket. Compatible with all models of ARRICAM,
235, 435, 535B, 16SR and 416.
K2.47207.0 RS-4 Extension Cable (3m/9 ft) KC-40
Extends the permanently attached cable of the RS-4.
8
* only as long as stock is available