ARRI Camera General Catalogue - Musitelli

LENS DATA SYSTEM
Lens Data System Accessories
Ident-No. Description
OTHER LENS DATA SYSTEM ACCESSORIES
K2.54137.0 ICU Cable (1m/3 feet) KC 72
Connects ICU (K2.47028.0) to Studio or Lite CAC connector
Use for speed/iris ramps with non LDS lenses
Note: If the WRC-2 (K0.60042.0) is used, the ICU is not needed
K2.52254.0 Lens Data Mount Standard LDM-1
Mounts instead of standard ZEISS/ARRI PL mount, provides
Lens Data System (LDS) features when an ARRICAM, 435 Xtreme
and CLM lens motors are used.
Compatible with Zeiss Ultra Prime, Variable Prime,
Standard Speed, Super Speed and any other lenses that can accept
the standard ARRI/Zeiss PL mount (K5.35204.0). For other lenses call.
K2.52272.0 Lens Data Mount Intermediate LDM-2
Mounts instead of an intermediate mount, provides
Lens Data System (LDS) features when an ARRICAM, 435 Xtreme and
CLM lens motors are used. Compatible with Angénieux Optimo 24-290,
Angénieux 17-102, Angénieux 25-250, Cooke 25-250, Cooke 18-100
and Zeiss Apo Tessar 300. For other lenses call.
INTERFACE TO CINE TAPE MEASURE
K2.65063.0 UMC-3 to CTM Cable (spiral) KC 116-S
Connects AUX socket on UMC-3 to REMOTE socket on Cinematography Electronics'
Cine Tape Measure (CTM). Function: transmits distance measurement data from CTM to UMC-3.
K2.52273.0 CTM to FEM-2 Cable (0,3m/1ft) K-CCU-CTM
Connects Cine Tape Measure to 435 FEM-2 CCU socket
K2.52265.0 CTM to CAC Cable (0,3m/1ft) K-CAC-CTM-Sp-S
Coiled cable, Connects Cine Tape Measure to ARRICAM CAC socket
108
Focus Tracking with Cine Tape Measure in cabled (non-wireless) mode requires Wired Handgrip Attachment
WHA-3. In wireless mode, Focus Tracking can be controlled via the Lens Data Display LDD-FP.
* only as long as stock is available