Teciam Pneumatics, Basic Technologies - Festo Didactic
Teciam Pneumatics, Basic Technologies - Festo Didactic
Teciam Pneumatics, Basic Technologies - Festo Didactic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Teciam</strong> > <strong>Basic</strong> <strong>Technologies</strong> > <strong>Pneumatics</strong><br />
D-8<br />
<strong>Pneumatics</strong><br />
Workstation System One workstation in the pneumatics laboratory consists of a single-sided, basic stationary unit with a cable duct and<br />
various assembly units. On top of the side profile columns an ER mounting frame is mounted, hosting all electrical<br />
components to be used for training purposes, in particular electropneumatics and closed-loop pneumatics. This ensures<br />
that a clear visible secession of pneumatic and electric components facilitates the different training approaches, as it<br />
can be seen as an example in the picture as follows, Picture D_03. Underneath the lower ER mounting frame a level<br />
profile is placed, hosting components which are frequently used. As shown in the laboratory layout, each workstation<br />
has further on one inclined aluminium profile plate in the size of 1100 to 700 mm, hosting all pneumatic circuits during<br />
training hours.<br />
© <strong>Festo</strong> <strong>Didactic</strong> GmbH & Co. KG • <strong>Teciam</strong> 3.0<br />
Picture D_03: Example of a single sided workstation<br />
Other cables, such as the main power supply, are suspended on a cable guide on one of the side profile columns.<br />
Rounding up the entire appearance of the workbench, all different equipment sets are being stored in mobile containers.