AEC Family piece - ThomasNet

More documents

Recommendations

Info

AK Series Granulator The AK Series under-the-press granulators feature built-in simplicity at a low cost and are ideal for size reduction of runners, sprues, blow-molded scrap, small thin wall parts and pre-cut thermoformed web. • IEC motor controls installed in ergonomic NEMA 12 enclosures • Sequenced starting with individual start/stop pbs with status lights • Auger reversing drum switch •Hinged chamber access lid with clear viewpoint • Gear reducer and chain/sprocket auger drive • Multiply V-belt rotor drive Under-the-Press Granulators WG Series Granulator Designed for continuous reclamation of skeletal web directly from the thermoform trim process, the WG Series granulators are available with 3 infeed widths. Can be positioned under or in front of the trim process. • Feed roll infeed (paddle optional) for processing material in line with a constant pulling force adjusted to the line speed of your thermoformer • Infeed and maintenance access via gas springs for cleaning and color changes •Pivoting screen cradle for easy removal of screens • Low profile, airveyor base with casters 2 WG1200 Series Granulator The WG1200 Series granulators offer a wide range of capabilities and are ideal for under-the-press or in front of the press applications. Models feature a horsepower range of 20 to 50 HP and throughput capacities of 1800-3000 lbs/hour. • 3-knife "open" Twin Shear rotor, optional 5-blade open rotors are available • Bolted and doweled construction • Pivoting screen cradle • 2 bed knives- reversible D2 • Oversized 7" dia. steel knurled feed rolls, optional paddle rolls are available • 8" pneumatic discharge
AK Series Under-the-Press Granulator Model Cutting Circle Throughput Motor HP Auger Feed Opening* Ship Weight AK68 6” (152mm) 175 lbs/hr (79kg) 3-5 HP (2.2-3.7kW) 7” x 14” (178 x 356mm) 650 lbs. (295kg) AK812 8” (203mm) 250 lbs/hr (113kg) 5 HP (3.73kW), 7.5 HP (5.59kW) 10” x 24” (254 x 610mm) 1300 lbs. (590kg) AK1216 12” (305mm) 450 lbs/hr (204kg) 10 HP (7.46kW), 15 HP (11.18kW) 15” x 27” (381 x 686mm) 2400 lbs. (1089kg) *Auger-Fed granulators must be guarded to prohibit inadvertent access to the moving auger. For outside of the press applications, the auger feed chutes dimensioned above provide minimum operator-safe distances from point of feed. Customer furnished chutes must adhere to these minimum dimensions. For interface to conveyors, separators, or other outside of the press equipment, consult factory for specific recommendations. WG Series Under-the-Press Granulator Model Cutting Circle Throughput Motor HP Throat Size Ship Weight WG36 7.9” (200mm) 800-1200 (363-545kg) 7.5-20 HP 8” x 36” (203 x 914mm) 2600 lbs (1181kg) WG56 7.9” (200mm) 1000-1500 lbs/hr (454-681kg) (5.6-14.9kW) 8” x 56” (203 x 1422mm) 2900 lbs (1305kg) WG1200 Series Under-the-Press Granulator Model Cutting Circle Throughput Motor HP Feed Height Ship Weight WG1244 1600 lbs/hr (725kg) 20 HP (14.9kW) 4000 lbs (1814kg) WG1256 12” (305mm) 2000 lbs/hr (907kg) 30 HP (22.3kW) 30” (762mm) 5300 lbs (2404kg) WG1274 2800 lbs/hr (1270kg) 40 HP (29.8kW) 8000 lbs (3629kg) 3 Under-the-Press Granulators
Page 1: P R O V I D I N G S O L U T I O N S
Page 5 and 6: AS Series Granulator Model Chamber
Page 7 and 8: GP1000 Series Beside-the-Press Gran
Page 9 and 10: AT500 Series Granulator Model Cutti
Page 11 and 12: GP2400 Series Granulator Model Cutt
Page 13 and 14: ALS Series Shredder Model Feed Open
Page 15 and 16: Film Reclaim Systems for Blown and

AEC Family piece - ThomasNet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?