Ama -Drainer-Box - Filter

Variant R
Above-floor Box
Ama-Drainer-Box
R 03.1 R 04.1
Inlet A 2x DN 100/70, graded, arranged at an angle of 90°,
(outsideØ 110/78 mm, e.g. for parts without sockets)
Can be drilled to suit individual requirements
Discharge side C Rp 2 (DN 50) Rp 2 (DN 50)
Since the units are not smell-proof/sealed to prevent ingress of water, there is no need for a vent pipe.
Tank Dimensions
R 03.1 R 04.1
Product Benefits
Substantially reduced capital expenditure since there is no
need for expensive steel tanks to be welded in situ or appropriate
concrete pump sumps.
Compact, pre-assembled box facilitates simple, cost-saving
relocation, if required.
Low power input thanks to well-matched hydraulics and motors.
High operating reliability ensured by temperature sensors in
the winding.
700
930
Variability offered by a number of different control, switching
and alarm units.
High wear resistance ensured by bi-rotational high-tech bellows-type
mechanical seal of silicon carbide/silicon carbide.
Corrosion-proof material combination of plastics/stainless
steel, Viton joint rings and oil flex cable.
Back-washing equipment prevents deposits in the tank.
11