The FUJIFILM Environmental Report/2001 Edition
The FUJIFILM Environmental Report/2001 Edition
The FUJIFILM Environmental Report/2001 Edition
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
◆ Other Environment-Friendly Products<br />
Environment-Friendly Digital Camera<br />
Design<br />
To achieve an environment-friendly digital camera design, an<br />
assessment sheet (consisting of nine basic items and 25<br />
sections) was used to incorporate low levels of energy use,<br />
weight reduction, and recyclability. <strong>The</strong> resulting digital<br />
camera was highly evaluated from the<br />
design stage. According to the<br />
evaluation, the new FinePix6800Z,<br />
when compared to the FinePix4700Z,<br />
uses 20% fewer parts while using<br />
electricity more efficiently,<br />
consuming 10% less.<br />
<strong>The</strong>rmo Autochrome (TA) Paper<br />
<strong>The</strong>rmo Autochrome (TA) Paper, used in the Aladdin Ace digital printer for<br />
photofinishing stores, is a heat-sensitive paper on which images can be produced in<br />
a full range of colors. Microcapsules in the paper generate different colors<br />
depending on the stage of the heating process, starting with yellow, which emerges<br />
at low temperatures. Photograph-like quality is achieved through the graduating of<br />
tonal density at the individual pixel level, making possible superior reproduction of<br />
half-tones in the manner of traditional photographic prints. TA Paper generates colors<br />
without the need for such accessories as ink cassettes, ribbons, or toner ink, and no<br />
plastic waste is produced. This makes it an extremely environment-friendly product.<br />
Fuji Medical Dry Imager FM-DP L<br />
Compact Camera/Instant Camera<br />
A certain amount of recycled plastic material is used for parts<br />
in the Instax 200 camera, and efforts are being made to<br />
reduce the number of parts. <strong>The</strong> Instax 200 uses 20% fewer<br />
parts and 5% less electricity, because of its increased<br />
efficiency, than the earlier Instax 10 model.<br />
<strong>The</strong> Fuji FM-DP L medical imager is a dry laser printer used for printing the imaging data from<br />
computerized tomography (CT), magnetic resonance (MR), and other imaging diagnostic devices. After<br />
converting the images into a size suitable for medical diagnosis, the images are recorded onto dry film<br />
having the same image quality as wet film. <strong>The</strong> FM-DP L is a totally dry processing system with no need for<br />
the disposal of waste fluid. All operations are carried out in normal lighting conditions. Darkrooms, water<br />
supply, and fluid removal are unnecessary.<br />
Fujitac, WV Film—Film for LCDs<br />
By using its proprietary film technology, the Company has reduced by half<br />
the thickness of its Fujitac polarizing board protective film for polarizing<br />
plates, from 80 microns to 40 microns. This enables the reduced use of<br />
resources and a lower impact on the environment at the manufacturing<br />
stage. WV Film, which offers expanded applications in the LCD field,<br />
combines with the Fujitac protective film for polarizing plates on the<br />
polarizing light board’s protective film, thereby reducing by one the number<br />
of sheets of Fujitac film and conserving resources.<br />
TAC<br />
PVA<br />
TAC<br />
Adhesive<br />
Adhesive<br />
TAC<br />
PVA<br />
TAC<br />
Conventional Type Direct Adhesion Type<br />
Polarizing plate<br />
WV<br />
LCD LCD<br />
WV<br />
Polarizing plate<br />
<strong>The</strong> components of WV Film<br />
Fujitac LCD-use film Use of WV Film increases the angle of vision<br />
TAC<br />
PVA<br />
Adhesive<br />
Adhesive<br />
PVA<br />
TAC<br />
33