Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
264 <strong>LINDO</strong>/<strong>LINDO</strong>Global<br />
SOLVER CONCURRENT OPTMODE (integer)<br />
Controls if simplex and interior-point optimizers will run concurrently, 0 means no concurrent runs will be performed,<br />
1 means both optimizers will run concurrently if at least two threads exist in system, 2 means both optimizers will<br />
run concurrently.<br />
(default = 0)<br />
0 no concurrent runs<br />
1 run concurrently if at least 2 threads exist<br />
2 run concurrently<br />
IPM TOL INFEAS (real)<br />
This is the tolerance to declare the model primal or dual infeasible using the interior-point optimizer. A smaller<br />
number means the optimizer gets more conservative about declaring the model infeasible.<br />
(default = 1e-8)<br />
IPM TOL PATH (real)<br />
Controls how close the interior-point optimizer follows the central path. A large value of this parameter means the<br />
central path is followed very closely. For numerically unstable problems it might help to increase this parameter.<br />
(default = 1e-8)<br />
IPM TOL PFEAS (real)<br />
Primal feasibility tolerance used for linear and quadratic optimization problems.<br />
(default = 1e-8)<br />
IPM TOL REL STEP (real)<br />
Relative step size to the boundary for linear and quadratic optimization problems.<br />
(default = 0.9999)<br />
IPM TOL PSAFE (real)<br />
Controls the initial primal starting point used by the interior-point optimizer. If the interior-point optimizer converges<br />
slowly and/or the constraint or variable bounds are very large, then it might be worthwhile to increase this value.<br />
(default = 1)<br />
IPM TOL DFEAS (real)<br />
Dual feasibility tolerance used for linear and quadratic optimization problems.<br />
(default = 1e-8)<br />
IPM TOL DSAFE (real)<br />
Controls the initial dual starting point used by the interior-point optimizer. If the interior-point optimizer converges<br />
slowly and/or the dual variables associated with constraint or variable bounds are very large, then it might be worthwhile<br />
to increase this value.<br />
(default = 1)<br />
IPM TOL MU RED (real)<br />
Relative complementarity gap tolerance.<br />
(default = 1e-16)<br />
IPM BASIS REL TOL S (real)<br />
Maximum relative dual bound violation allowed in an optimal basic solution.<br />
(default = 1e-12)