STB_Installation Manual.pdf - APR
STB_Installation Manual.pdf - APR
STB_Installation Manual.pdf - APR
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Carbon Fiber Strut Tower Brace<br />
INSTALLATION MANUAL<br />
AUDI PERFORMANCE & RACING<br />
1027-B Opelika Road Auburn Alabama 36830
Parts Included<br />
1- Pre assembled strut tower brace<br />
8- M10 allen head bolts<br />
8- Threaded inserts<br />
1- Threaded fastener installation tool<br />
Fig 1.1<br />
Fig 1.2<br />
AUDI PERFORMANCE & RACING<br />
1027-B Opelika Road Auburn Alabama 36830
Fig 1.3<br />
AUDI PERFORMANCE & RACING<br />
1027-B Opelika Road Auburn Alabama 36830
INSTALLATION GUIDE<br />
1. Place complete assembly over each shock tower and mark holes as shown in<br />
Fig 1.1.<br />
2. Drill 8 9/16” holes. This is the most critical part of the installation. Be very precise<br />
with the hole placement. If one hole is not in the correct place or at the incorrect<br />
angle, it will be diffi cult to install the mounting plate. Be sure the holes are drilled<br />
perpendicularly to the mounting surface. Starting with a carefully placed pilot hole<br />
will be helpful.<br />
3. Insert pre-assembled threaded fastener and tool into a hole.<br />
4. Hold the nut and tighten allen head bolt. This compresses the threaded fastener<br />
and locks it in place. The insert should be flush when finished. Refer to Fig.1.2<br />
5. Back out bolt, replace the threaded fastener and repeat for the other 7 holes.<br />
6. Bolt brackets down with the supplied allen head bolts.<br />
7. Tighten two M12 bolts underneath each swivel joint. Refer to Fig1.3<br />
8. Tighten the two hinge bolts. Refer to Fig1.3<br />
9. Rotate carbon fi ber bar to pre-tension outward.<br />
10. Tighten locknuts on each end against the bar. Refer to Fig1.3<br />
11. Once the bar has been set, place the supplied <strong>APR</strong> Motorsport sticker on the<br />
driver’s side of the bar. Refer to Fig1.1<br />
AUDI PERFORMANCE & RACING<br />
1027-B Opelika Road Auburn Alabama 36830