JNM-ECA Series JNM-ECX Series JNM-ECS Series - George Fox ...
JNM-ECA Series JNM-ECX Series JNM-ECS Series - George Fox ...
JNM-ECA Series JNM-ECX Series JNM-ECS Series - George Fox ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 MEASUREMENT OF DIFFUSION COEFFICIENT<br />
2.4 PROCESSING DIFFUSION MEASUREMENT DATA<br />
After measurement, process the data in nD Processor window, and use the Curve<br />
Analysis window for calculation of the diffusion coefficient. The procedure is explained<br />
below.<br />
First, recall the measurement data into the nD Processor window as in two-dimensional<br />
measurement data processing. In addition, the operation of section 2.4.1 is not necessary<br />
when the nD Processor window is already displayed when measurement data is<br />
transmitted from the spectrometer immediately after the end of diffusion-coefficient<br />
measurement.<br />
2.4.1 Loading Diffusion Coefficient Measurement Data<br />
In order to load the diffusion coefficient measurement data (FID) into the nD Processor<br />
window, perform the following procedure.<br />
1. Click on the Data Processor button in the Delta Console window.<br />
The Open Data for Processing window appears.<br />
Version display box<br />
List box<br />
Data information<br />
display box<br />
Fig. 2.4 Open Data for Processing window<br />
2-8 NM<strong>ECA</strong>/<strong>ECX</strong>-USA-3
Change language