Product range for perf... - GEA Farm Technologies

Neck bar / feeding table divisions
If it is possible to avoid locking in the animals, the neck
bars and feeding table divisions from GEA Farm
Technologies present an inexpensive alternative to more
complicated feeding solutions. The animals have a large
amount of freedom of movement when feeding. The
use of spacers should be planned for in this open
system. The neck bars and feeding table divisions from
GEA Farm Technologies have a sturdy design and are
simple to install.
Feeding tube / feeding table division:
Part Number Description Dimensions / Misc.
5510-3338-002 Intermediate piece Lgth 15 cm for 2“ tube
5500-9660-038 Wire arm with nuts 2" ( 60 mm ) M10 x 102 mm
5540-9660-007 Wire arm with nuts 2,5" ( 76 mm ) M12 x 112 mm
5510-6031-004 Two-piece clamp coupling 2" with bolts
5510-3335-000 Coupling plate 2,5" ( 76mm ) x 2" ( 60mm )
Alberta feeding tube:
Part Number Description Dimensions / Misc.
5530-1130-003 Bracket with moveable lubricating nipple Incl. T-clamp for 2"
5530-1130-004 Chains with rubber
5510-6040-013 Tube 2" 2" ( 60 mm ) Lgth 330 cm
5510-2566-000 Plastic cap, grey 2" ( 60 mm )
5510-6031-004 Two-piece clamp coupling 2" with bolts
5510-3335-000 Coupling plate 2.5" ( 76mm ) x 2" ( 60mm )
5500-9660-038 Wire arm with nuts 2" ( 60 mm ) M10 x 102 mm
5540-9660-007 Wire arm with nuts 2.5" ( 76 mm ) M12 x 112 mm
5510-3336-000 Coupling plate On column 84 – 114 mm
5500-9660-038 Wire arm with nuts 2" ( 60 mm ) M10 x 102 mm
5500-9660-044 Wire arm with nuts 3" ( 89 mm ) M12 x 124 mm
42 |