Altec constructions catalog.
Altec constructions catalog.
Altec constructions catalog.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Threaded rod, A2, with locking nuts and EPDM-tape<br />
Item No. Measurements Length<br />
111976212250<br />
M12<br />
250 mm<br />
111976212330 330 mm<br />
1<br />
It is possible, with the aid of pre-assembled locking nuts, to fix the<br />
adapter plates directly on the threaded rods or onto elevation angles.<br />
Two locking nuts are required to tighten at the steel girder. Threaded<br />
rods in other diameters (for example M10) and lengths are available<br />
on request.<br />
Mortar cartridge<br />
Item No. Measurements l d Minimum part thickness<br />
40RM00008000 RM8 80 10 110<br />
40RM00010000 RM10 90 12 120<br />
40RM00012000 RM12 110 14 150<br />
Measurements in mm<br />
Mortar cartridges with reactive resin enable the expansion free<br />
anchoring in un-cracked concrete. They are especially useful for close<br />
spacings, near edges and for the anchoring of elevation angles. Other<br />
sizes available upon request.<br />
Reaction anchor-threaded rod, A4<br />
Item No. Measurements a l d Minimum part thickness<br />
40RGM0408110 M8 x 110 80 110 8 110<br />
40RGM0410130 M10 x 130 90 130 10 120<br />
40RGM0412160 M12 x 160 110 160 12 150<br />
Measurements in mm<br />
As a double ended fastening element, the anchor can be combined and<br />
used with different injection mortars and mortar cartridges. The choice<br />
for the assembly system has to be made depending on the roofing.<br />
Mostly such anchors are used for concrete or reinforced concrete.<br />
21
Change language